Hey all -

just put back the ebrake mechanism that had been removed, and I have all the kit I need except the wires running from the cockpit to the brakes themselves, and since I've never seen them installed on my car - I don't know how they route, or what they look like!

Can someone explain me on this?

Being a sailor, I'm tempted to just rig up some stainless braid with swage fittings and call it a day -

If it is convenient to grab a pic I'd sure appreciate it....

thx

td

See pictures.

If you need a part, put a WTB in classifies. The part list below will give you a name of the part.

Parts list:

http://www.autoatlanta.com/porsche-parts/h...;section=701-10

BINGO - thank you - I need the cable 59 and bits 60, 61 and 62 from above - thanks so much!
td

You might not need those parts. Those are for the heater cable!

I don't know why but they have the emergency brake and heater lever cable on same diagram.

I clean it up and erased the heater lever/cable parts. Hope this NEW image helps.

I did not mean to confuse you my friend.

You need roughly 30 thru 37. Times 2.