Mueller
Jan 16 2015, 12:44 PM
Is there still a concern of wrecking a new cam and lifters these days?
Ages ago I remember buying the ceramic lifters due to this issue, but not sure if still needed or recommended.
stugray
Jan 16 2015, 01:24 PM
Buy matched cam and lifters together and you wont have a problem.
If you cann afford ceramic lifters (and can find them), I would go that route.
EMW carries these:
http://www.europeanmotorworks.com/pvw/054-.../T-4+Lifter+39gBut at $650 for a complete set its a bit pricey
Mark Henry
Jan 16 2015, 01:48 PM
QUOTE(stugray @ Jan 16 2015, 02:24 PM)
Buy matched cam and lifters together and you wont have a problem.
If you cann afford ceramic lifters (and can find them), I would go that route.
EMW carries these:
http://www.europeanmotorworks.com/pvw/054-.../T-4+Lifter+39gBut at $650 for a complete set its a bit pricey
Ceramics haven't been available for years....I still have one set
r_towle
Jan 16 2015, 02:48 PM
I kinda like the EMW setup for reducing a bit of weight there.
Stout lifters also, never had issues on the 356,s
Rich