88" from ground to bottom of channel
105" inside dimension
top rail made from double unistrut
Located in Antioch , Ca
Can be taken apart i
Click to view attachment
Click to view attachment
Full Version: Steel framed gantry engine lift or ?
I call that stuff, "grown man erector set" the strut nuts fit in the strut, might have springs on them to hold the nut close to the mouth of the strut. 9/16" wrench will loosen the bolt and you can remove the brackets.
Lay it down first, so it does not fall on you.
Lay it down first, so it does not fall on you.
QUOTE(malcolm2 @ Jan 31 2015, 03:33 PM) 
I call that stuff, "grown man erector set" the strut nuts fit in the strut, might have springs on them to hold the nut close to the mouth of the strut. 9/16" wrench will loosen the bolt and you can remove the brackets.
Lay it down first, so it does not fall on you.
Nope... no girly man 9/16" wrench.... 3/4" manly sized wrench needed!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.