QUOTE(puffinator @ Apr 18 2015, 07:34 AM)
What is the torque in ft lbs for tightening the single front mounting screw?
I haven't found that listed but since it's a 12mm bolt I use 60 lb-ft.
QUOTE(wndsrfr @ Apr 18 2015, 12:17 PM)
Also..."while we're in there..." what is the torque value for the bell housing to engine bolts on a mag case /6?
Not sure why that would be different for -6 but all the manuals for the -4 show 22 lb-ft.