I'm looking to buy a full set of core 2.2/6 heads that don't have damage or broken fins

They need to be carb heads from a t spec motor
(Not mfi)

Tia

Do you happen to have a part #, Brant?

I believe I still have a set that came from a Sportomatic 911.

I will get the part #

Click to view attachment

Thanks a ton Mark for the list!

so the casting number for the ones I need is:
911.104.306.0R

OK, I'll check and get back with you

6 or 12 I have em ,,, not core prices though...

what date code do you need ?? that chart is generic..

I have a couple of sets too. Sent email but no response.

weird...
and sorry...

I didn't get an email
but I'll check my spam folder
and I'll send a pm now.

brant

I cleaned up one of them fairly completely, then only cleaned up the combustion chambers on the other five. Five are dated 6/69 and one 7/69.

Plug hole threads all good. Valves look OK & appear to be seated, not sure about condition of guides.

#1 - minor pitting in chamber

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

#2 -

Click to view attachment


#3 -

Click to view attachment


#4 -OOPs - looks like I missed a close-up of one ... it's one of the better looking ones

#5 - A little more sever pitting (must have been the most open intake valve)

Click to view attachment


#6 - dated 7/69

Click to view attachment


All 6 - (five are only cleaned on the chamber side)

Click to view attachment