I picked up a Mallory Unilite distributor and am wanting to know what type spark plug wires are you all using with yours? Are any of you using Mallory coils and CD Boxes with your Unilite's?

I used this:

Spark plug wire:
http://www.summitracing.com/parts/msd-34039

Boots:
http://www.summitracing.com/parts/msd-3322

90deg plug end (LS-1):
http://www.summitracing.com/parts/msd-3303

I am using magnacore 8mm

for a 2.0 look for Aurora.

Checkout Chris Foley at Tangerine Racing for spiral wound wires.

That is what I have on my car.

http://www.tangerineracing.com/ignition_electrical.htm

I did the DIY plug wires on mine way back when...I'd get the Tangerine Racing ones if doing it again, that is a good price for no headache of putting together your own!

If you have carbs the 90 degree LS-1 boots are lower than the stock plug boots that stick straight out of the tins.

I'm not sure what you mean. What are LS1 boots?

http://www.summitracing.com/parts/msd-3303