I want to run the trans breather to a catch tank and vent but can't seem to figure out what the transmission breather thread size and pitch is. I've also searched but cannot find the answer.
Thanks.
Full Version: 901 Trans Breather
M14-1.5 is what mine measured
David
David
Thank you David.
For giggles, I grabbed a 1/4" NPT to -08AN adapter and the 1/4" NPT side threaded in with no drama. Turns out that 1/4" NPT is real close to M14-1.5. Keep in mind that the stock breather is tapered so this all works out quite well.
M14-1.5 is what mine measured
David
For giggles, I grabbed a 1/4" NPT to -08AN adapter and the 1/4" NPT side threaded in with no drama. Turns out that 1/4" NPT is real close to M14-1.5. Keep in mind that the stock breather is tapered so this all works out quite well.
QUOTE(Harpo @ Oct 4 2015, 07:59 PM) 
M14-1.5 is what mine measured
David
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.