914ltd
Dec 3 2015, 01:06 PM
I have a large section cut from a crashed LE. This car was really nice!
Longs have had the jack receivers removed and battery tray replaced.
Sail panels, door posts, hell hole, rear floors, longs, firewall, inner and outer rear suspension mounts (both sides) and engine mounts are all excellent. $600. plus truck shipping. Truck prices are fairly inexpensive. Contact me if you need further info Brad
Luke M
Dec 3 2015, 01:51 PM
Hi Brad,
How's the pass side long from front fender to the rear trunk?
Any damage there that you can see?
Thanks,
Luke
Looking for this section if you plan on cutting it up.
JoeDees
Dec 3 2015, 02:24 PM
How much would it be for the passenger door jamb and lower sail panel?
914ltd
Dec 3 2015, 04:09 PM
I would like to sell this as one piece. I may separate it later.
The right long is good. the top of the front cowl reinforcement would need added metal.
Additional pix added.
Luke M
Dec 3 2015, 04:47 PM
I see the l/r damage to the fender but how hard was it hit?
Could you post a few pics of the rear damage ?
I also sent you a pm on this.
914ltd
Dec 3 2015, 06:49 PM
QUOTE(Luke M @ Dec 3 2015, 02:47 PM)
I see the l/r damage to the fender but how hard was it hit?
Could you post a few pics of the rear damage ?
I also sent you a pm on this.
The car went thru some trees. The rear was damaged, both rear quarters were buckled. Also the cowl and door on the passenger side was hit. The damage is mostly the windshield frame, passenger door and dashboard. It appears the longitudinal was not hurt. I have cut the damaged rear portion of the car so pictures won't show much.
colingreene
Dec 3 2015, 10:23 PM
is the center bumper tab damaged?
the one that holds the bumper rubber up?
914ltd
Dec 4 2015, 01:05 PM
Rear floor and firewall pix. no rust!
914ltd
Dec 10 2015, 08:25 PM
Bump
kafermeister
Dec 15 2015, 06:57 AM
Brad, are the ends of the front panel in decent condition? I am trying to undo a previous body-kit. Looking for both R and L.
Click to view attachment
914ltd
Dec 15 2015, 07:31 AM
QUOTE(kafermeister @ Dec 15 2015, 04:57 AM)
Brad, are the ends of the front panel in decent condition? I am trying to undo a previous body-kit. Looking for both R and L.
Click to view attachmentRick, I've sold the nose but may have other possibilities. Brad
kafermeister
Dec 15 2015, 08:38 PM
Awesome. Let me know if some of the other possibilities pan out.
914ltd
Jan 7 2016, 01:41 PM
Bump. these parts are far nicer than some of the available repro parts.
914ltd
Jan 17 2016, 07:28 PM
Someone needs this section
got914?
Jan 18 2016, 12:25 PM
Id be all over this if i had somewhere in ny state (near Canadian border) to ship to and keel while i cut it up and then scrapped it
914ltd
Jan 24 2016, 07:41 AM
bump
914ltd
Feb 16 2016, 08:24 AM
Bump
Luke M
Feb 16 2016, 03:10 PM
QUOTE(Luke M @ Dec 3 2015, 12:51 PM)
Hi Brad,
How's the pass side long from front fender to the rear trunk?
Any damage there that you can see?
Thanks,
Luke
Looking for this section if you plan on cutting it up.
Hi Brad,
If you decide to cut it up keep me in mind. I still need the following section.
Thanks,
Luke
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.