I just need 12 Schnorr washers for my Syncro Westy CVs. They're the same size as 914....M8, I believe.

http://www.ebay.com/itm/Porsche-914-Schnor...V0g&vxp=mtr

Thanks, but that vendor isn't exactly a friend of the 914World community.

From Pelican forum:
EMPI # 875081 and M8 Schnorr (serrated Belleville) washers from McMaster-Carr are installed on 84 M8 100mm CV.

EMPI # 875081 was $1.50 a piece.
Schnorr was a little under $10 per a bag of 100 pieces.
Cheers, Dion

I got mine from PMB....

Our local hardware store carries these I believe (Portland, OR).
Just not sure of the sizes.

Tacoma screw products? Or save fuel and time and buy 100.

No worries, was not even looking at who the seller is.

I may have a whole box of these on the shelf. If, (and that may be a big If), I can find them I will PM you and can send a few your way at no cost.

Thanks. Let me know.

McMaster Carr 100 for $11.00

http://www.mcmaster.com/#serrated-lock-washers/=10iejjy

Bringing in these to add to the nuts and bolts section. Will be .20 each. Now that we us reg mail shipping will only be a buck or two.

Ordered from PMB. Thanks for all the input.