I have a bunch of parts that I'll sell individually or as a lot. I also have multiples of some of the items below. Buyer pays shipping. I have not used any of these parts nor tested them so I consider them core parts.

1.8 injectors $20
1.8 AFM (6 Pin) $60
Resistor pack (sold)
Cold start injector$10
1.7 Throttle body $10
1.7 plenum $10
2.0 plenum (sold)
Tps (sold)
Fuel pressure regulators $5
Fuel rails $5
Thermotime switch (sold)
Intake runner pair $20
Aux air regulator (tested and is warming up but not rotating so it's stuck) $20
1.8 computer $20
2.0 computer $20

I also have some wire harness sections, contact me if you're interested. If you see something that I don't have listed above send me an IM.

Interested in the harnesses pieces. Whatscha got and whatcha want for them?

Hello Jeff,

I'll pull the wires I have out of the box and try to assess what they are and take photos. Please pm me your email.

Ooops, posted twice.

PM sent for the 1.8 computer and the resister pack.

Thanks.

PM Sent for 2.0 Plenum, TB, and Runners

PM sent for the TPS

I could use a spare 2.0 computer.
do you know if it was working/running?
and what year is it from?

thanks
brant

I am interested in the 1.8L throttle body. I'll try to PM you (new to the forum, sorry).

Dang! Missed out on this!. Oh well, put me 2nd in line. Free bump.

I would still be interested in the computer
Posts 8

Hi, apologies that I missed your first message. Pm sent.

Hi,
Looking for 1.8 intake runners.
Thanks

PM sent for:

1.7 intake plenum

1.8 computer (If still available)

Did Brant get the 2.0 ECU.

If available what Number is on it?

I have one left, but I think it's for a 1.7. Here are the numbers on it...

0 280 000 037
022 906 021E

PM's sent to everyone.

late to this party but, interested in the 1.7 throttle body (actually just the tps). pm sent

Paul ;
I looked in my parts boxes , I could not find one .
Sorry I did not call u back about it. Very busy ....



Rick