I have a 76 914 and am not getting power to the switch. The J west fuse panel shows the horn and fog lights share the same relay and fuse. My horn works but I have no power to the switch. The wire to the switch is one grey with a red stripe a black and the brown ground. I have the late model color coded wire diagram but it does not depict the fog lights. I must be missing something.
Thanks Brian

Low beams must be on.

Thanks Curt
I figured it out. I saw a tread that changes the source so you can run the fog lights without the low beams on. I might try that out.
Brian

..............please post that thread

I'll have to look but it is a Pelican Tech thread.

Here is the link to the conversion of the sourcehttp://members.rennlist.com/demick/fogrewire.html

Bad link...no work!

... this works!


http://members.rennlist.com/demick/fogrewire.html