So McMark thinks the advance is not happening quick enough, upon receiving my Mallory Unilite, all I did was replace one spring inside (red I think) with the recommended gray spring....I "thought" the other spring inside was gray so then I'd have gray/gray combo....now I'm second guessing my springs (at work right now so I cannot check)


thought someone might know

thanks

i changed both out. they are not the same as installed

your advance should be done by about 2800 (depending on initial advance at idle
)

i switched both out...mucho more responsive

QUOTE (Aaron Cox @ Mar 30 2005, 08:36 PM)

i changed both out. they are not the same as installed your advance should be done by about 2800 (depending on initial advance at idle ) i switched both out...mucho more responsive

thanks...now to find the box with all the extra parts.....oh joy

QUOTE (Mueller @ Mar 30 2005, 09:01 PM)

QUOTE (Aaron Cox @ Mar 30 2005, 08:36 PM) i changed both out. they are not the same as installed your advance should be done by about 2800 (depending on initial advance at idle ) i switched both out...mucho more responsive thanks...now to find the box with all the extra parts.....oh joy

all grey springs are not alike...

there were a few tyoes of greys in the spring and advance change kit

Did you get your "new" timing light? I was just wondering how you were doing when I came on this thread.