Hi everyone,

I'm looking for a set of 4 air injectors. They are just pipes that screw into the heads. On most 75-76 2.0s.

Thanks,
Jackson

I should be able to round up a set. Most of them get plugged with carbon and have to be drilled out.
Most people scrap them and put in plugs or bolts. What are you using them for? You don't have to smog in AZ do you?
Bruce

Unfortunately, yes 68+ in Phoenix and Tucson.

My 912E engine is a GC but the heads are from a GA so they're not even drilled for the air injectors. Luckily the holes for the air injectors are on the same axis as the sheet metal hold down screws so I'll be able to indicate off a pin gauge pretty easily.

I'm going to be using them for an hour a year

I have this set of five I cleaned up. Drilled out the carbon on both ends. Wire wheeled the threads.
$40 Shipped.

Bruce