Hi
I am putting my interior together, what is the best way to install the glove box door? Anyone have any pictures?
Thanks,
Ed

Sorry no pics to provide. It will "pop" in and settle to a position. Place your washers and screws in the access holes. The tough part is the micro springs on each side.
Small needle nose pliers or medical hemostat pliers are real helpful here.
Access the oneside from underneath dash near radio slot. For the one near passenger door I popped out the airvent to access. Have fun.

With glove box removed:-

Install each spring on to back of dashboard first
Then 'offer up' the lid from the inside
Fit springs to lid
Finally install bolts and washers

Doing it this way gave me enough wiggle room to avoid removing vents etc.


Dave

Thanks, the springs are a challenge

Thanks, the springs are a challenge

Do a search, been covered with photos, sorry don't have link handy.