Had some free time over the Holidays and wandering the internet I found out that ATS has re-released/made available again the 914/VW wheel of years gone by. I had a set on our first 914 and thought they were stunning. Got 205-60's under the std lip (Ok a slight roll of the rear fender lip was required on one side). A BIG shout out to wheel disti's to make these available here in the US again. A couple of pics of our old 914 a '74 1.8 and a capture of the new wheel off the ATS Europe site. If the price was right I would but a set.

Our latest project is a '74 2L, red in color with black accents all around. These wheels would really set it off nicely.

I've always liked the ATS four-lug wheels!

--DD

http://www.csp-shop.com/cgi-bin/cshop2/fro...sort=0&all=

I like how the wider 7s are cheaper. Too bad the offsets are VW not 914.

They look much better all aluminum vs the painted look IMHO.

They aren't exactly cheap either.

76 project / parts car I picked up over thanksgiving has a set with the center caps. I like the looks of them.