sb914
Jun 28 2017, 08:43 AM
ValcoOscar
Jun 28 2017, 08:49 AM
For now you can copy and paste link...I can't figure out how to upload video.
If someone can link video I would appreciate it.
https://www.youtube.com/watch?v=8lSixWXukMo...eature=youtu.be
ndfrigi
Jun 28 2017, 10:33 AM
Sir Eddy, planning to come along with my family but sorry no 914 for now. But other porsche car is welcome?
76-914
Jun 28 2017, 11:16 AM
Curbandgutter
Jun 28 2017, 11:38 AM
QUOTE(ndfrigi @ Jun 28 2017, 09:33 AM)
Sir Eddy, planning to come along with my family but sorry no 914 for now. But other porsche car is welcome?
Yes other porsche's and family are welcomed!
Alphaogre
Jun 28 2017, 11:38 AM
that's right up the road from me, I'll try and make it!
sb914
Jun 28 2017, 12:18 PM
QUOTE(ndfrigi @ Jun 28 2017, 09:33 AM)
Sir Eddy, planning to come along with my family but sorry no 914 for now. But other porsche car is welcome?
Noel , Yes of course, this is a family event drive whatever you want.
Elliot Cannon
Jun 28 2017, 04:40 PM
Horshoes AND go karts? Shit howdy, I'm there. Uh oh. Isn't that the same weekend as the RRC?
Coondog
Jun 28 2017, 05:28 PM
Count me in.......
craig downs
Jun 28 2017, 06:53 PM
Sounds like fun. I'll be there.
Curbandgutter
Jun 28 2017, 06:56 PM
LIST OF ATTENDEES: (76-80 as of 8-25-17) Will update as needed. (?) means that I need to know how many you are bringing for the all important food head count. [?] means that I need to know if you are bringing a 914 and how many?
33 914 VEHICLES ARE CONFIRMED AS OF (8-25-17)
Oscar ValcoOscar (6) [3] PAID
Eddy SB914 (2) [1] PAID
Rudy Curbandgutter (4) [1/2] PAID If possible I will bring my tube chassis project car
Noel Ndfrigi (4) [0] PAID
Alphaogre (Maybe)
Elliot Cannon (Maybe)
Coondog (2) [1] PAID
Chip CSDilligaf (2) [0] PAID
Craig Downs (2) [0]
Gary Gmanscott (Maybe)
914-300Hemi (2) [1] PAID
Garrettlee2 (2) [?]
Lawrence Larmo63 (1) [1] PAID
Second Wind (2) [?]
914 teener (2) [1] PAID
so.o.c914er (2) [1] PAY AT GATE
Calvinator2016 (2) [1] PAID
Mike D. (2) [1] PAID
Whitetwinturbo (2 + maybe 2 more) [2] PAID
Kgruen2 (2) [1] PAID
Steve (1) [1] PAID
Bernbomb914 (2) [1]
Kent 76-914 (2) [1]
forrestkhag (2) [1]
BigFour1973 (2) [1]
73-914kid (2) [2]
Fatboy007 (2) [1]
Mark Euro911 (2) [1] PAID
Don and Tina don-6 (2)
Keith914 (1) [1] PAID
blue6 (2) [0]
Banananose914 (1) [1]
Socalandy (1) [1]
Lucky9146 (2) [0] PAID
FG914 (2 + maybe 2 more) [?]
Jerry Joseph (1) [1]
Albert Mendoza (1) [0]
Siverson (2) [1]
Marc Mechanic (1) [1 ] PAID
Mike Olsib914 (1) [0] PAID
Tom T. (4) [1] PAID
914 7T3 (2) [1]
ndfrigi
Jun 28 2017, 08:05 PM
QUOTE(sb914 @ Jun 28 2017, 11:18 AM)
QUOTE(ndfrigi @ Jun 28 2017, 09:33 AM)
Sir Eddy, planning to come along with my family but sorry no 914 for now. But other porsche car is welcome?
Noel , Yes of course, this is a family event drive whatever you want.
Thanks sir Eddy! I confirmed to Rudy that four of us (my family) are coming. My wife asked even without a 914?
914-300Hemi
Jun 28 2017, 08:19 PM
Count Michelle and I in.
garrettlee2
Jun 28 2017, 08:36 PM
I needed a goal date to finish my 914 I'm in and I'll be dragging my wife. After the rabbit to temecula it I may have to really drag her.
Larmo63
Jun 28 2017, 09:19 PM
I will be there too. Count me in as a solo act.
You might even see me driving a black 914.
Excellent location, thank you so much, I'll bring whatever you need.
second wind
Jun 28 2017, 09:54 PM
I am going to this and it sounds fantastic!!! 914's and tri-tip sandwiches.....am I missing anything??
gg
914_teener
Jun 28 2017, 10:06 PM
Count me in and either my wife if she isn't studying or my son.
Send the form in right?
SO.O.C914er
Jun 28 2017, 10:43 PM
Count Pam and I in. To local for us to miss this one.
ValcoOscar
Jun 29 2017, 07:55 AM
QUOTE(sb914 @ Jun 28 2017, 07:43 AM)
Let's try this video link:
https://www.youtube.com/watch?v=8lSixWXukMo&t=3s
ValcoOscar
Jun 29 2017, 08:10 AM
QUOTE(sb914 @ Jun 28 2017, 07:43 AM)
<! :stromberg: ! width="420" height="315" src="https:// www.youtube.com/watch?v=8lSixWXukMo" frameborder="0" allowfullscreen></! :stromberg: !>
914_7T3
Jun 29 2017, 08:39 AM
Calvin loves Tri-tip. Count us in as well!
914_7T3
Jun 29 2017, 08:48 AM
QUOTE(Calvinator2016 @ Jun 29 2017, 07:39 AM)
Calvin loves Tri-tip. Count us in as well!
Just kidding, I'm bringing my son so Calvin the Doggo stays home.
ValcoOscar
Jun 29 2017, 10:24 AM
forrestkhaag
Jun 29 2017, 10:36 AM
Maybe just describe in words what is on the video if anyone has actually seen it......... if it exists...
This looks to be a well attended event. Maybe I can even get my hood sorted out by then...........
Curbandgutter
Jun 29 2017, 04:39 PM
Word on the street is that Coondog may be bringing something pretty special. If it's ready by that time.
Mike D.
Jun 29 2017, 04:52 PM
Count me in for this one!
sb914
Jun 29 2017, 05:22 PM
QUOTE(Mike D. @ Jun 29 2017, 03:52 PM)
Count me in for this one!
Hey mike ,
Contact leamon , he and Oscar use to hang out in the eighties!
Oscar has some cool old shots off there cars back in the day !!
Maybe he'll post one !
effutuo101
Jun 29 2017, 08:55 PM
Maybe next year....
whitetwinturbo
Jun 29 2017, 09:47 PM
914_7T3
Jun 30 2017, 02:30 AM
QUOTE(Curbandgutter @ Jun 28 2017, 05:56 PM)
LIST OF ATTENDEES: (as of 6-29-17) Will update as needed. (?) means that I need to know how many you are bringing for the all important food head count.
Oscar ValcoOscar (6)
Eddy SB914 (2)
Rudy Curbandgutter (4)
Noel Ndfrigi (4)
Alphaogre (Maybe)
Elliot Cannon (Maybe)
Coondog (2)
Chip CSDilligaf (2)
Craig Downs (?)
Gary Gmanscott (Maybe)
914-300hemi (2)
Garrettlee2 (2)
Lawrence Larmo63 (1)
Second Wind (?)
914 teener (2)
so.o.c914er (2)
Calvinator2016 (2)
If Larmo is coming, I will have to have the Tornado mirrors off the car by then!
kgruen2
Jun 30 2017, 02:51 AM
Sounds like fun. Count me in for 2. Thx.
Steve
Jun 30 2017, 07:52 AM
I'll be there!! Love barbecue!!
Curbandgutter
Jun 30 2017, 09:21 AM
Hey Temecula 914 Fun Day attendees. Please PM Oscar at ValcoOscar and let him know:
1) Name
2) Profile Name
3) Location
4) City
ValcoOscar
Jun 30 2017, 09:45 AM
QUOTE(Curbandgutter @ Jun 30 2017, 08:21 AM)
Hey Temecula 914 Fun Day attendees. Please PM Oscar at ValcoOscar and let him know:
1) Name
2) Profile Name
3) Location
4) City
Also, Please include headcount.
Some accommodations spoken for...waiting to hear from admins & vendors
76-914
Jun 30 2017, 09:51 AM
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
Curbandgutter
Jun 30 2017, 10:00 AM
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
Sounds like a great idea. We'll need someone withe the tools. However, Isn't that something that takes hours to do? I've never done one but would love to see it done.
BTW How many do I put you down for?
ndfrigi
Jun 30 2017, 10:31 AM
QUOTE(ValcoOscar @ Jun 30 2017, 08:45 AM)
QUOTE(Curbandgutter @ Jun 30 2017, 08:21 AM)
Hey Temecula 914 Fun Day attendees. Please PM Oscar at ValcoOscar and let him know:
1) Name
2) Profile Name
3) Location
4) City
Also, Please include headcount.
Some accommodations spoken for...waiting to hear from admins & vendors
Hi Sir Oscar,
Since you got my info details already thru pm, how do u want us to send the pre-registration fee?
Thank you for everything!
bernbomb914
Jun 30 2017, 11:11 AM
Please include bernbomb914 plus 2 to attend I am also in Temecula
914_teener
Jun 30 2017, 11:35 AM
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
Curbandgutter
Jun 30 2017, 11:39 AM
QUOTE(914_teener @ Jun 30 2017, 10:35 AM)
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
WOW that is going to be fantastic. I'm sure Oscar will chime in, but I don't think that finding a flat surface at this place will be a problem.
Curbandgutter
Jun 30 2017, 11:39 AM
QUOTE(bernbomb914 @ Jun 30 2017, 10:11 AM)
Please include bernbomb914 plus 2 to attend I am also in Temecula
OK you've been added!
ValcoOscar
Jun 30 2017, 11:41 AM
QUOTE(914_teener @ Jun 30 2017, 10:35 AM)
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
DONE...I have flat surface
Oscar
76-914
Jul 1 2017, 07:47 AM
QUOTE(914_teener @ Jun 30 2017, 10:35 AM)
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
Great. I can assist with set up and making some extra plates if it would mean more alignments that day. Rudy, Been meaning to get by your place but business before pleasure. Put us down for 2, please sir.
Curbandgutter
Jul 1 2017, 09:06 AM
QUOTE(76-914 @ Jul 1 2017, 06:47 AM)
QUOTE(914_teener @ Jun 30 2017, 10:35 AM)
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
Great. I can assist with set up and making some extra plates if it would mean more alignments that day. Rudy, Been meaning to get by your place but business before pleasure. Put us down for 2, please sir.
2 down for Kent please.
ValcoOscar
Jul 1 2017, 11:18 AM
914_teener
Jul 1 2017, 11:33 AM
QUOTE(76-914 @ Jul 1 2017, 06:47 AM)
QUOTE(914_teener @ Jun 30 2017, 10:35 AM)
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
Great. I can assist with set up and making some extra plates if it would mean more alignments that day. Rudy, Been meaning to get by your place but business before pleasure. Put us down for 2, please sir.
Kent,
The toe plate is used to measure castor angle and an angle reference.
If you mean rear shims then yea.....bring as many different thickness you can. Those are tricky to put in as you know if the bolts haven't been soaked with PB Blaster. So whomever wants to do theirs as an example make sure that they are not rusted in place or no go. Soak them for a couple of days with PB. You don't want those breaking off.
The go carts look freakin cool.
Thanks Oscar for doing this.
forrestkhaag
Jul 1 2017, 06:18 PM
Nice one Eddy!
I am all in at this point. The 6 is screaming and I should have my tranny issues sorted by then.
sb914
Jul 2 2017, 05:44 AM
QUOTE(forrestkhaag @ Jul 1 2017, 05:18 PM)
Nice one Eddy!
I am all in at this point. The 6 is screaming and I should have my tranny issues sorted by then.
Sweet Forrest. Bring Keith with you. He'll probably be done with his car as well. Maybe you,Lawrence, and Keith can ride together in your new 6 conversions
76-914
Jul 2 2017, 10:43 AM
QUOTE(914_teener @ Jul 1 2017, 10:33 AM)
QUOTE(76-914 @ Jul 1 2017, 06:47 AM)
QUOTE(914_teener @ Jun 30 2017, 10:35 AM)
QUOTE(76-914 @ Jun 30 2017, 08:51 AM)
Tech sessions are fantastic opportunities. It would be great if there were more than one tech session. I'd love to attend one on 4 wheel alignment. Maybe have tech session(s) kick off early when it's cool.
I promised Kent I'd do this one.
I have the toe plates and tools and string.
It takes about an hour or so. Main thing is setting up the square and then the math.
Need a very flat surface tho.
Great. I can assist with set up and making some extra plates if it would mean more alignments that day. Rudy, Been meaning to get by your place but business before pleasure. Put us down for 2, please sir.
Kent,
The toe plate is used to measure castor angle and an angle reference.
If you mean rear shims then yea.....bring as many different thickness you can. Those are tricky to put in as you know if the bolts haven't been soaked with PB Blaster. So whomever wants to do theirs as an example make sure that they are not rusted in place or no go. Soak them for a couple of days with PB. You don't want those breaking off.
The go carts look freakin cool.
Thanks Oscar for doing this.
Very good point. Those attending may want to begin the PB Blaster soak, now! I have a few extra shims I'll bring. Other's; pls do the same if you have some laying around. Just clean them of dirt, debris and rust. PM me with anything else I can bring for this forum. Any other ideas for a Tech Forum? No reason not to have another one run concurrently. Not everyone will be up for the alignment forum. I see a lot of folks are intimidated by welding. Those of us that do weld could bring our helmets for others to view instructors welds and then do some hands on welding themselves. I'm sure there are guys that would enjoy an intro to welding. Welding "intros" forums are usually received with a great deal of enthusiasm.
Larmo63
Jul 2 2017, 12:07 PM
My car should be up and running before that.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.