Flatnines, world member Mark Henry

Engines stock and high performance., machining and installation service for aircooled VW and all years Porsche 911 including watercooled.
Retail parts sales for Canada and ROW
Local GTA east mechanical service.
Transmission rebuilding, 901,914, 911, 915, 930, G50 and G96
Parts of my manufacture.
Custom fabrication
LN Engineering parts

Bumper buy on now.
http://www.914world.com/bbs2/index.php?showtopic=303138

Breather tanks in develoment.
http://garage.914world.com/bbs2/index.php?showtopic=311613

Type 4 full flow oil pump cover engine mount mod
http://www.914world.com/bbs2/index.php?sho...full+flow+mount

DFL (Dry Film lube Coating) and ceramic coatings service
http://www.914world.com/bbs2/index.php?sho...full+flow+mount

Website will hopefully be up soon flatnines.com

More to come

Congratulations on the launch of your new site, wish you the best!
_Dan

More pic's of my work

More

more

and more...

A service I provide.
Modifying 993 (964) cams to accept early 911 sprockets. Weld, regrind and cut for woodruff key.
964 cams require over $1200 of special tools to set the cams and is a PITA.
This can be done for both 964 cams into a early engine or for a 993 engine.

I also can cut off the PS and scavenge pump drives if not needed. You have to cut off the PS drive to use a stock oil cooler.



[img]http://www.914world.com/bbs2/uploads/post-26-1405232128.jpg
[/img]

A project in progress.

Porsche 996 full rebuild with an upgrade from 3.4 to 3.8L with LN Nickies and JE pistons.
A very complex engine, not for the faint of heart or light of wallet.
I'll post more pic's on this soon.

Thanks

Awesome, congrats!

Dude...you need to be down here in the States.
Seriously.
But I know Canadian Porsche-phIles will appreciate your work.
Best of luck with your new venture Mark.
Cheers

Very cool Mark! Best of luck to you!

Best of luck with your new venture.

Not new, 27 years, change of name to reflect that I also do Porsche and now watercooled 911. The water cooled cars are definitely a new direction.

But thanks to all the well wishers!

More pics

more

DFL coating and ceramic pistons
RSR style air deflectors