Larmo63
Nov 30 2017, 06:09 PM
Dang, that is some heavy surgery right there. The fenders look great.
Are the warts and wart holes going to go away?
Cairo94507
Nov 30 2017, 07:05 PM
I love the warts - they stay.
bigkensteele
Nov 30 2017, 07:07 PM
QUOTE(Cairo94507 @ Nov 30 2017, 05:05 PM)
I love the warts - they stay.
I agree. The amber over gold looks good!
Cairo94507
Nov 30 2017, 07:52 PM
IronHillRestorations
Nov 30 2017, 08:00 PM
They will look better on Michaels' car than they did hanging in my shop. I got them to black hole for my own 6, but it's found a new home.
Larmo63
Nov 30 2017, 11:29 PM
QUOTE(Cairo94507 @ Nov 30 2017, 05:05 PM)
I love the warts - they stay.
You and Mr. Banananose like those damn warts. I'm going to scrub 'em if I can get Kent to paint my car.
banananose914
Dec 1 2017, 01:44 AM
Scrub a dub, dub, the warts stay on the tub.
Cairo94507
Dec 1 2017, 07:29 AM
You have another career awaiting you Jim....song writer.
Larmo63
Dec 1 2017, 09:56 AM
To add to his illustrious comedy writing and parking lot stand up routine?
Cairo94507
Dec 1 2017, 12:02 PM
You never want to limit your options.....
914350
Dec 4 2017, 03:14 PM
Pics.
914350
Dec 4 2017, 04:57 PM
Pics.
914350
Dec 4 2017, 06:22 PM
Donor rear fender. Great condition. Got the car in the shop and I'll start removing it tomorrow.
Cairo94507
Dec 4 2017, 08:32 PM
Terrific looking parts. Thanks for posting the pictures Kent.
Larmo63
Dec 4 2017, 08:49 PM
Wow, you won't even have paint that fender.
Blue6
Dec 4 2017, 09:10 PM
QUOTE(914350 @ Dec 4 2017, 05:22 PM)
Donor rear fender. Great condition. Got the car in the shop and I'll start removing it tomorrow.
Kent, say it isn't so. Your cutting up the "green hornet"? So much history.
Luke M
Dec 5 2017, 12:52 PM
QUOTE(Blue6 @ Dec 4 2017, 08:10 PM)
QUOTE(914350 @ Dec 4 2017, 05:22 PM)
Donor rear fender. Great condition. Got the car in the shop and I'll start removing it tomorrow.
Kent, say it isn't so. Your cutting up the "green hornet"? So much history.
Hi Kent,
What's the plan with the green 914 once you remove the r/r quarter ?
Keep up the great work..
914350
Dec 5 2017, 01:54 PM
QUOTE(Blue6 @ Dec 4 2017, 07:10 PM)
QUOTE(914350 @ Dec 4 2017, 05:22 PM)
Donor rear fender. Great condition. Got the car in the shop and I'll start removing it tomorrow.
Kent, say it isn't so. Your cutting up the "green hornet"? So much history.
Sorry Dave, it's gotta go.
914350
Dec 5 2017, 01:56 PM
QUOTE(Luke M @ Dec 5 2017, 10:52 AM)
QUOTE(Blue6 @ Dec 4 2017, 08:10 PM)
QUOTE(914350 @ Dec 4 2017, 05:22 PM)
Donor rear fender. Great condition. Got the car in the shop and I'll start removing it tomorrow.
Kent, say it isn't so. Your cutting up the "green hornet"? So much history.
Hi Kent,
What's the plan with the green 914 once you remove the r/r quarter ?
Keep up the great work..
Hi Luke,
I'll be parting it out. Some parts will go to my six. PM if there's anything you need.
Cairo94507
Dec 5 2017, 03:18 PM
Sadly, in the wild, some must die so others may live. Here we have a very nice green car giving its life to help others in need. We offer thanks and bow our heads in prayer.
IronHillRestorations
Dec 5 2017, 04:19 PM
QUOTE(Cairo94507 @ Dec 5 2017, 01:18 PM)
Sadly, in the wild, some must die so others may live. Here we have a very nice green car giving its life to help others in need. We offer thanks and bow our heads in prayer.
..."it's the circle...the circle of life"....
914350
Dec 5 2017, 06:07 PM
Pics.
mb911
Dec 5 2017, 06:10 PM
I wish my car was that clean to start with as the green car..
bigkensteele
Dec 5 2017, 06:45 PM
QUOTE(mb911 @ Dec 5 2017, 04:10 PM)
I wish my car was that clean to start with as the green car..
Wish my right inner fender looked like that.
Cairo94507
Dec 5 2017, 07:13 PM
Nice looking fender Kent. How is the backside?
Blue6
Dec 5 2017, 07:58 PM
Yep, the green hornet is a very nice car. I dated all my wives in that little beauty. I still want to buy the seat.
Larmo63
Dec 5 2017, 08:15 PM
The seats have been dispatched to the Smithsonian.
914350
Dec 5 2017, 09:33 PM
QUOTE(Cairo94507 @ Dec 5 2017, 05:13 PM)
Nice looking fender Kent. How is the backside?
No rot, I'll take a pic tomorrow.
Cairo94507
Dec 6 2017, 07:56 AM
914350
Dec 6 2017, 10:32 AM
Pics.
Cairo94507
Dec 7 2017, 09:35 AM
Cant' wait to see that baby media-blasted and ready to be installed.
Thanks Kent for pulling that terrific quarter off and making it available for my car. This is going to be one tight and straight chassis.
914350
Dec 7 2017, 04:05 PM
JmuRiz
Dec 8 2017, 08:41 AM
Amazed at what nice donor parts you guys get out west...the stuff in the east is usually almost as rusty as the stuff being replaced!
Cairo94507
Dec 8 2017, 11:10 AM
Believe me, I know.....
mepstein
Dec 8 2017, 11:52 AM
QUOTE(JmuRiz @ Dec 8 2017, 09:41 AM)
Amazed at what nice donor parts you guys get out west...the stuff in the east is usually almost as rusty as the stuff being replaced!
That's why I'm buying the $500 chassis.
Cairo94507
Dec 8 2017, 12:01 PM
Mark - The Green Hornet's chassis? Or another one?
Cheers,
Michael
banananose914
Dec 9 2017, 12:18 PM
QUOTE(Blue6 @ Dec 5 2017, 05:58 PM)
Yep, the green hornet is a very nice car. I dated all my wives in that little beauty. I still want to buy the seat.
Uh, Dave. Don't you mean you got pregnant in that car? I think your last kid had my eyes. I initially thought that the 914 was a small car, but you sure changed my mind. You are one flexible lady. I want to thank you for that. And Kent, don't use any black lights near that car. You may see some things you don't want to see.
hot_shoe914
Dec 9 2017, 06:30 PM
QUOTE(914350 @ Dec 5 2017, 06:07 PM)
Pics.
Did this come off of a 76?
Blue6
Dec 9 2017, 11:04 PM
QUOTE(banananose914 @ Dec 9 2017, 11:18 AM)
QUOTE(Blue6 @ Dec 5 2017, 05:58 PM)
Yep, the green hornet is a very nice car. I dated all my wives in that little beauty. I still want to buy the seat.
Uh, Dave. Don't you mean you got pregnant in that car? I think your last kid had my eyes. I initially thought that the 914 was a small car, but you sure changed my mind. You are one flexible lady. I want to thank you for that. And Kent, don't use any black lights near that car. You may see some things you don't want to see.
Wow. Just know that we're here to help you. Nobody is going to hurt you. Just let the nice men put the nice white coat on you. We've told you before to wear a mask when you help Kent with the paint work.
bulitt
Dec 10 2017, 06:08 AM
QUOTE(JmuRiz @ Dec 8 2017, 09:41 AM)
Amazed at what nice donor parts you guys get out west...the stuff in the east is usually almost as rusty as the stuff being replaced!
So True. What we think is nice vs what is really nice. Hopefully west coasters understand "that" when making a purchase from the EC? And living in the south where minimal salt is used on the roads in the winter- we stay clear of used vehicles from the North...
914350
Dec 11 2017, 05:27 PM
Progress pics.
914350
Dec 11 2017, 05:29 PM
More.
Ready for media blasting.
Cairo94507
Dec 11 2017, 05:50 PM
Oh that looks very nice. We now have an early front panel.
gereed75
Dec 11 2017, 07:32 PM
QUOTE(Cairo94507 @ Dec 11 2017, 06:50 PM)
Oh that looks very nice. We now have an early front panel.
Notice how the picture of the nice spot welds is Crystal clear, then the one with the nasty seam welds is all out of focus, then the ground nice finished panel is all crisp again!!!!
Makes an amateur newbie panel welder feel better!! Thank god for grinders!!
altitude411
Dec 11 2017, 08:06 PM
Very nice!
rick 918-S
Dec 11 2017, 10:28 PM
Love that fix. I have to do the same thing.
Blue6
Dec 11 2017, 11:59 PM
"Amateur newbie panel welder", that's funny.
sixnotfour
Dec 12 2017, 06:12 PM
QUOTE(rick 918-S @ Dec 11 2017, 09:28 PM)
Love that fix. I have to do the same thing.
Me too, I have 2 nos late panels
jim_hoyland
Dec 13 2017, 07:47 AM
Great thread ! Kent, thanks for posting all the pics, it's a treat seeing your work
914350
Dec 13 2017, 11:10 AM
QUOTE(rick 918-S @ Dec 11 2017, 08:28 PM)
Love that fix. I have to do the same thing.
Thanks Rick.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.