So after all of the testing we have good feed back. The mufflers are quiet as stock and flow a bit better over stock as larger id tubing internally. We still have to tweak the tail pipe locations and may ask for a little assistance with that. I am going to offer 10 of them at 650 for intro pricing and then 900 after that. They will be made 100% of 304 stainless weighs 18lbs, 2.5 dia tail pipe, installation kit will be included, shipping will be extra and to be determined.

Cairo94507(Michael) is 1st on the list so 1 more spot.(deposit )
914forme (Stephen)
Steve ( aka steve;)( deposit)
Live free +drive (jon) (deposit)
Rktmn247 (kent) (deposit)
MEpstein(Mark) doesn't count for group buy
Restore2seater (Pat)(deposit)
Dion
Marv E
Mark Howard.
Jmuriz (Nathan)



Deposits will be 300.

I will post pictures as we progress just as I did with the heat exchangers project with delivery in November.. Please let me know if you have any questions. Click to view attachment Click to view attachment

PM sent

I will take one!!

Hi, I will take one to match the heat exchangers.

Jon

I want one. Thanks!

Updated the list. Please remember I need pictures of the heat exchangers installed on your cars so I can have pelicanparts add it to their website.

Also deposits can be made by paypal =add 3% or by check. Paypal is mbmcfarland6@ gee mail .com. (Gmail.com) these are good for mfi cars

Ben - I just wanted to offer a big "Thanks!" for being one of those who help enable us to build our dreams.

Being a reliable supplier is no easy feat.

You're on the short list of those who meet my criteria of "if I need/want it and he/they make it, I'm sending my money!"

Thanks again, we couldn't do it with out you and our other well known suppliers. Keep up the awesome work.


(And now that I have you nicely buttered up: I have this LS3 build that needs a custom muffler made.... )

I could build you the shell with no inlets but all the internals and you could weld on what you want ? Just a thought.

So suprised no one else.. I would love to share with pelican folks but think they would get mad..

Could try Rennlist or 914club.

Hi Ben, I'm interested in one. Sent a PM asking about the feasibility of incorporating a short cat on the outlet. Crazy idea probably..

I think internally would be easier but just my thoughts.

Can you put two center 2" GT style outlets vs. The right side outlet? Will the sound level be the same?

I have already modified my rear valance, but my car is loud.......

It would just like the factory mods to a sport and it will be louder..



Also deposits are updated..

I sent a deposit via PayPal and included the 3%

Oops your right wrong person. Corrected now.

I'm in for one if a spot is till available!

Yes there is still room.

MY first time logging on in a week...let me know the timeline to get a definate.

I have an old M&K sport I was going to get modified to a 3-outlet rally muffler.
Would it be possible to get this with addition of the sport tips that can be capped?

Full new would be better than modding an older one right?

Nathan

They are 2 different type of mufflers. This one is focused on quiet and slight improvement on stock performance which has proven over the years to be almost unbeatable..

The m&k mufflers are about pure 6cyl porn. They sound intoxicating and build off of that.. Its all about what you're looking for.

Ben, sent a pm. I'm interested if still able to join in the group buy.

Updated did I forget anyone?

I need to get invoices out for the remainder of you that put deposits down.

What the heck, I'll join the group buy on the last spot. My 3 year old says my not-loud other car is too loud, maybe getting a quieter muffler will make her want to ride when she's 5 and I finish my car

Sounds good I will add you.

Ben,
When will you expect the remainder of the payment? Just curious for budgeting purposes.

Nothing to much to update other then all drawings are at laser cutter. Expecting parts to be done in 2 weeks give or take so production will start soon..

November would be best guess right before shipping.

Click to view attachment

Tail pipe is set now for final fit on Georges car Monday..

Ok so minor seatback but have plenty of measurements to correct now.. I tried it on Georges 73 2.7 with a 915 trans and also his orginal six. Tail pipe needs a true 90 and the angle downward about 30 degrees.. Click to view attachment

Ben, I am in for one.

Just drove my 3.2 with an m&k R muffler. Love it but I know my wife will never ride in the car with that exhaust. Well, maybe once if I don’t rev it before she gets in. Keep me on the list for this muffler.

Will do..

I'd like to get in on this if it's not too late.

Hi Ben,

What rear cone did the 915 tranny have - stock, Vellios, Wevo etc?

What was the clearance to the muffler?

Jon

Vellios..on a gt cloneClick to view attachment

The stock heat exchangers needed a slight elongation (about the width of a muffler flange) to get the stock Leitstriz muffler to fit, but Ben's is slightly smaller in diameter so should fit even with the Vellios tail cone. I think the Wevo 915 sticks too far for any single banana style muffler to fit.

I will buy one for $650 if still available. How can I send the $300 deposit?

Everyone that jumped on the past day or 2 I am very willing to make you mufflers but won't be until I finish the group buy folks.. Email me direct at mbconsulting21 at gee mail.com

Parts are in from laser cutting and fixture is almost done.. We will start to see progress shortly..

Will have 1 ready this week to ship to someone in the group buy that will install right away to ensure fittment.Click to view attachment

Click to view attachment Click to view attachment

How do they sound Ben? Getting excited to see these, even if my engine build is months away from completion.

They sound almost stock.. That was/is the goal.

Click to view attachment

Fixture is done and 1st one is almost done.

I can immediately install it on my car. My car has your heat exchangers.

My only concern with your car is that you run a 915 with the extension s and that may skew the results.. Not that they won't fit the same..

I agree, no problem. Can’t blame a guy for trying!! Lol

Its funny I test fit the muffler on Georgeruds car and it has a 915 with modded stock heatexchangers to lengthen the pipes to fit the muffler..