As called out in the title.

Did you a bunch of replacement glass for the mirrors, $9.14 each.
Will be $15 after the GB

Have a few other goodies I'm butting together here too so you could combine.
Just bump the thread if you are interested.
Pics to follow Sunday, but you get the idea.

Are you making both sizes. I need about 6 early and 2 late.

Interested in a couple sets

+1 on glass.

I'll take one for a '72. Not sure if that's early or late

I'm in for 2 sets.... 1 early and 1 late.

-bob

Mark, Are these flat or convex mirrored glass?

One for my 75 please.

Im in..

These are flat not convex. I made off the 75 I have and it fits the 73.
So where is the cut off? I had not noticed early and late. I'm assuming 72 or earlier?
I'll have to procure a sample to check. If they are smaller I can accommodate fairly easy.
Mark

I could use 2 small and 2 large

Put me down for one! What else new are you going to release!?!?

ill take one and combine it with the $40 GB

Early is a sharp, right angle for the chrome arm. About a 1/4” smaller glass. Different plastic spacer and trim.

Thanks for volunteering a sample. For the record, do you know the production breaks on these?

Either way I'll have both.
Thx
Mark

Some pictures on these as well as the assembly procedure. Not the plastic "ring" is best bent in from the longer sides to remove.

Glass removed

Glass seated in the base - no retainer "ring" installed.

Retainer installed

I will be sending out codes here late today. I also have 3 other GBs running so you can combine.
They are -
- The CHT for D jet PN 0280130012
-shift bushings GB
-GB for Mirror - Late
-GB for the positive terminal block that will be launching tonight and I'm working on a complete cable option.

Early

Late

I have to jump in on this - thanks Mark!

Mark,

Could you please include me for the codes for both the early and late mirror replacements? Thanks

Dee Bryson

I'll take a late one

The early ones I have a template for them on the way, may take me about 10 days to make up in quantity.

I am in for 2. (1973 or 1974)

thanks

-- brett

Put me down for 2, late model

PMs sent to all this far

Thx

4 early mirrors. Thank you.

I'll take 2 early & 2 late

Me too, one of the late style.

Yes. Original glass (with most of the silver missing) headed your way - usps priority.

2 please

All responded to with PM this far.

I have two mirrors that need glass, but I don't remember if they're early or late ...

Plus, they're in AZ, and I won't be back there till the end of November

I need a mirror for my 75...Im in for the GB


-Robert

Mark,

I would like two late model (1976) mirrors with SS screws and base gaskets. Thanks as always.

please PM for the GB codes, 2 late and 2 early

thank you

+2 for late glass. Thanks Mark.

Odds are they're late, but you know where to find me.
Mark

I would like to join this group buy but I need to confirm if I have late or early mirrors that need the glass replaced in them.

Jeff B

Mark...were you making any Convex mirrors?

No not currently. For what application?
Mark

the same door mirrors as this project...thanks

Factory didn't make a convex, at least not that I know of.
Easiest way I can think to make a one off is to find a larger mirror and wetland down.

Bump, interested. I have a '74 and the driver's mirror angles down (isn't horizontal), so I may have the wrong one(s). I'd like two whole complete assemblies for my car, both sides, so I can see what's over my shoulders without turning my head...