mmascari
Oct 15 2017, 01:41 PM
Does anyone have a picture of the sleeve w/gear that slides in to the transmission for the speedo angle drive? I bought one but I believe I have the wrong one. Should it have a thread on it for the angle drive to thread in to? Do I have the wrong sleeve?
Mikey914
Oct 15 2017, 02:46 PM
You have the gear orientated backwards. However it does appear to be the correct one. If not we sell these that have been retrofitted to avoid the extra drip that you get by adding a seal. Let me know if you need one. You can find them here if you need it there's also some pictures that might help
http://shop.914rubber.com/searchquick-subm...keywords=Speedo
mmascari
Oct 15 2017, 04:43 PM
QUOTE(Mikey914 @ Oct 15 2017, 01:46 PM)
You have the gear orientated backwards. However it does appear to be the correct one. If not we sell these that have been retrofitted to avoid the extra drip that you get by adding a seal. Let me know if you need one. You can find them here if you need it there's also some pictures that might help
http://shop.914rubber.com/searchquick-subm...keywords=SpeedoYou are correct Sir! I am an idiot. Thanks for the help!