michael7810
Mar 4 2018, 07:12 AM
Question before I install my new windshield. During the test fit sitting on the rubbers strips/spacers I noticed the gap on the top is probably twice as wide as the bottom. Is this correct? Pic below of how I positioned the spacers...
Thanks,
Click to view attachment
ChrisFoley
Mar 4 2018, 10:17 AM
I would try to center it. We typically custom fit the rubber blocks to achieve the best edge spacing.
The important thing is that all the trim clips are free to catch and release.
Over time the windshield will sag some, so its better to have plenty of gap at the bottom.