I made these simple GT ish muffler hanger brackets for use on a 6" diameter muffler like my line or the m&k to ensure proper muffler support..

If any one is interested let me know $44 shipped..Click to view attachment

Looks good to me, I'm in.

Question, do you use the stock 2.0-style Y hanger along with this? (to give it extra support)...I plan on doing that if I can.

They look great. Can't wait to get mine. I had sort of rigged up something ugly but now I can make it right.

No need to do that but you can if you like..

Put me down for one. PM me with your PayPal.
Cheers,
Michael

Mbconsulting21@gmail.com

Will this work with the Dansk Stainless Steel 911 muffler I use on my 914-6 conversion?

If 'yes', then I would like one.

Very cool! Questions:

1) as above, will these work with a Dansk 911 muffler early style, and
2) is it designed with side shift in mind - or tail shift - or both?

If 1=yes and 2=side shift then I'm in for one for my GT-ish build

- Tony

No idea for the dansk though I would think it would be darn close as 6 inch dia is what the curve is for and the adjustable slots allow it to move up and down

I set them up for a sideshift but seeing as they replace the y muffler hanger and bolt on there should be no issues.

Well alrighty then. Pls sign me up for one,

- Tony

Just email me or paypal directly to mbconsulting21@gmail.com

Just sent in...thanks again for the cool 914 products!

Payment sent - and agree, great to see these products being developed and made available to the community!

- Tony

You are welcome..

These are actually fairly simple.. But serve an important purpose..

I will get everyones boxed up and sent usps.. This week yet

Tony I need your last name as well..

Thanks

Ben...
Do you have any of these left?
If so I'll take one...
Just let me know and I'll paypal you.
Thanks...John

Yes I do..

Hey there Ben,
Send me your payment info for 1 of these, please!
-John

PP sent. Thanks Ben.

PP sent....muchas gracias!

Payment sent.

Ben, What do you use for straps?

Thx!

Constant tension clamps from mcmaster car designed to work within the 6" range for the muffler diamter. They come in stainless for about 10 dollars each.

Do these work for a stock 911 muffler?

I just got mine. Very simple and clean. Exactly what I needed.

Can you post a picture of how this installs or describe what it attaches to ?

Basically bolts right to the end of the trans where the 2 studs extend out where the Y bracket would bolt and then extends to the muffler where 2 band straps go around the bracket tabs and the muffler to support the muffler body just like a 911.

I'll have it on today or tomorrow and take a pic

Ben,
Just sent in my payment with paypal. Thanks for making these!

Shipped 8 today.. The folks I had addresses for. Got a couple of folks I am looking for addresses for

Not a lot to see but it does work perfectly. Doesn’t interfere with anything.
Took about 20 minutes to install since I had to remove the old bracket and loosen the muffler. Pretty easy, even for me.

The last 2 will ship tomorrow.. I need to make some more..

All have been shipped usps.. And sold out for the moment. I would also think these could be made to work with type 4 if someone wanted to..

I will build stock shortly..

Got mine today, thanks!

Good deal.

Got mine too.

https://www.mcmaster.com/#hose-and-tube-clamps/=1col9bp

I like these.. Click to view attachment

I do too. And they’re only $8-12. What size should I buy?

8946K38

It goes from 5-15/16"- 6 1/4" should work perfect 10 bucks each..

Received mine today! Thanks Ben! Nice looking piece!

Only problem I had with the part is that it bolted right on. No fitting, modifying, reworking. Sort of anti climatic.

Thank you again Ben for making these. I received mine and ordered the clamps.

Ben...got it...thanks...very nice part...lines right up with a stock 911/914-6 muffler...will get some pics..
Thanks agian for making these available!

Someone asked me if this bracket works with Martin Botts 916 kit.
I finally got around to mounting mine. Perfect fit and looks great. I did have a Mickey Mouse home depot bracket with a 911 bracket jury rigged with the 914-4 2.0 hanger. This looks much better and much quicker to install. Only mods I had to do with my Martin Bott 916 kit, was to install longer studs on the trans. The back up switch required me to space Ben's quiet muffler back 3/8", which also required me to space the GT bracket 3/8" with washers. The previous Triad muffler was a much bigger hassle and required me to space the muffler back 2". The quiet muffler is much quieter, sounds great and no drone!!
Click to view attachment
Click to view attachment