morsmanlaw
Jul 21 2018, 03:13 PM
I purchased a Weltmeister 19mm front sway bar kit, but it did not come with instructions for installation. Does anyone have a set of installation instructions they could post or send a link for? I have the general information from various sites, but need detailed information, such as length of drop arms, loading of a-arm during installation, etc. Thanks.
morsmanlaw
Jul 21 2018, 09:38 PM
QUOTE(914werke @ Jul 21 2018, 09:26 PM)
here you go
Thanks, Rich! Is it just this one page?
HansJan
Jul 21 2018, 09:53 PM
There is this dude on YouTube showing you how to do this. I started this today (welded in the reinforcement triangles from 914ltd).
https://youtu.be/l2-iOhb-4GwGood luck.
morsmanlaw
Jul 21 2018, 10:27 PM
QUOTE(Hans Jan @ Jul 21 2018, 10:53 PM)
There is this dude on YouTube showing you how to do this. I started this today (welded in the reinforcement triangles from 914ltd).
https://youtu.be/l2-iOhb-4GwGood luck.
Thanks - Ian Karr has put up a number of great videos on 914 projects. He even uses the Brad Mayeur braces in his vid, as you and I are doing.
I just wish it wasn't 103 here, so I could get moving on this project!
maf914
Jul 23 2018, 07:17 AM
If you still need the installation instructions you can find them in the following thread link. Go to post #22. Thanks to Campbellcj.
http://www.914world.com/bbs2/index.php?sho...;hl=weltmeister rear sway bar&st=20
morsmanlaw
Jul 23 2018, 08:38 AM
QUOTE(maf914 @ Jul 23 2018, 08:17 AM)
If you still need the installation instructions you can find them in the following thread link. Go to post #22. Thanks to Campbellcj.
http://www.914world.com/bbs2/index.php?sho...;hl=weltmeister rear sway bar&st=20
Thanks. Apparently, this is all the direction that Weltmeister gives for installation of the bar.