Because trying to find 2.0 heads are becoming more rare to fine ..I ran across this ad
Is this worth doing if I already have a set of 1.7 heads to modify ??
What do you experts think ... Take a look and let me know ... Thanks !!

A pair of 1.7 914 heads, "Q" castings built by Brother's Machine in Ontario CA. Cross posted to Pelican classifieds in link below, but a few details here:

56cc combustion chambers

Opened to 1.8/2.0 bore (94/96mm bore)

12 mm Plugs relocated to 2.0 location

Chambers welded up & reground with unshrouded plugs and generous quench area

Dual springs

Heavy exhaust port modifications

These were built to move some air.

http://forums.pelicanparts.com/porsche-914...-914-heads.html

Why? you can buy new 914 2.0 core repops, build a set from there.

Link doesn't work for me, just goes to the forums page.

Where to buy ??? All the places Ive look are asking $2500.00 US just for the heads

Hi Mark,

Where to buy them (2.0 heads) and how much to get them good for a 1.7 to?
Who does the work on the heads? I have a 1.7 in my garage find. Just thinking

Bob B

Here are the ones that Len just did a small group buy with. they don't have much of a track record, but you don't have to do all the mods that the 1.7L AMC castings need to make into a 2.0L head.

https://aapistons.com/collections/cylinder-...stud-round-port

http://www.914world.com/bbs2/index.php?sho...=heads&st=0


See thread above. Might want to PM Len (HAM Inc is his screen name)