EDIT - SOLD

This is an almost new muffler - it was used for less than 500 miles while tuning a custom EFI on a 2.4L Type 4 engine.

It has an oxygen sensor bung welded in, so if you want, you can use a wide band air fuel ratio gauge to read your mixture for jetting, etc.

Really good shape otherwise. New, this one is $375 from Auto Atlanta - I'm asking $225.

http://www.autoatlanta.com/Porsche-Monza-M...PN-RTM2106.html

Drop to $195

Is that a 2.0 exhaust?

Short answer - maybe.

Longer answer, technically no, but if you have the matching flange heater boxes, doesn't matter if it's a 1.7, 1.8 or 2.0 - as far as I can tell.

Someone please correct me if this isn't accurate - I'm not a 914 expert.

The 2.0 spacing is different from the 1.7 or 1.8

Click to view attachment

Ah - thank you! Center to center on the furthest holes is 28", so it IS a 2.0L