Someone hacked up my fan shroud and I need the two aluminum cast halves...

Thanks!
Andrew

I'm pretty sure they were the same for all engine sizes and years.

basically yes, and there seems to be a couple different locations where the hose that goes from the shroud to the charcoal canister hook into the shroud..

Preferred shroud has a port for the charcoal canister on the driver side of the shroud....

Picture link: http://bowlsby.net/914/Classic/zTN_FI_Hose..._Late1974_A.jpg
(Thanks Jeff) Click to view attachment

I'm 90% sure I have one, but you might wait to see if there is one locally. I can't imagine it would be cheap to ship.

True, but shipping from So. Cal to No. Cal wouldn't be too bad - better than shipping cross-country

Hey Andrew,

Let me go to my garage to see if mine has a port for a canister...

kkid

Two things: 2 "styles" - Early (sounds like what your after) & Late with the additional bosses atop to attach the smog pump.
& the Impeller housing or shroud is MAG or predominately a magnesium alloy.