Closing this one as these are gone.

I will make a new thread with my current inventory of parts.

Interested in the 70 shell if it can be saved.

@gcrotvik I know it needs a LH floor board, but I'll investigate further once I get it home.

Steel wheel for my spare?

I desperately need a top for my '70

Are you entering the VINs of all the cars you're scrapping in the database?

http://www.914world.com/bbs2/index.php?showtopic=94572

@Euro911 Yeah, I normally do just to see where they came from and if I scrap them I note it

For everyone else, I will note your request and reply in order a I confirm sellable parts.

Passenger window

Will you have the sections available to patch up the Mustang 914 we talked about before?

@1adam12 I have a stack of glass currently. Which do you needed, clear or tinted?

@djway if the shells end up going to scrap, yes the 70 has the sections you need.

I would like the steering wheels, ignition switch, door handles, and all the locks (lock set) off both cars. Thanks.

Good to know. Looking for Clear

@1adam12 you have PM

@tweet there's list forming for the steering wheel, I'll put you on it. The other parts you're first for.

@jos.hall do you want the red one or the normal one?

Good Driver's side door?

Thank you

-Andrew

Front sway bar assembly?

@amfab - will take a look, I know the one on the 70 has a small dent in it.

@Turtleman2 - No sways

I could go for a unmolested late dash frame, if someone is coming to Vegas/Route66/WCR

@Chris914n6 I believe the 73 dash metal is in good condition

I could be interested in retractable seat belts if available.

@stevend914 I'll check on them and let you know

I need a cover for my side shift transmission.
it would be good had one for my 73
thanks

Interested in engines and trans

Hi there

I am after a complete carby 1.7 engine. I am replacing an EV conversion so need all tinware, ancilliaries etc.

Only catch is that I am located in New Zealand so would need help shipping! Understand if this is in the "too hard" category. Also if you have a targa top!!!!

Cheers
'Greg

@Chi-town Preferably the normal one but I'm not opposed to making a harlequin 914

Interested in motor and side shift.

@michaelgelling are you referring to the plastic cover over the shift linkage?

@tdskip got your text

@KiwiBins I can do international shipping. I'll let you know on the engines and I do have tops available

@jos.hall that would be epic

@RFoulds there's a list for them I'll put you on it.

Cars come home today!

Cars are home!

The 73 is a little special as it's one of the "First 1000" in 73' with a production date of 8/72 and VIN ends in 0923. Supposedly these are German Spec cars shipped to CA due to high demand.

Appears to be numbers matching? EA Code 1.7 / HA trans
Needs rust repair in the floors/trunk/ poked hell hole and didn't go through but seal ledge is gone.
Original gauges are gone but I have silver dots for it.
EFI is gone but harness is there / Has Spanish Webers on it currently/ engine turns by hand

I am going to give it till Saturday before I strip it, if you want it whole let me know ASAP!

The 70' is coming apart as the floors and longs are toast.

LH Door is clean, RH door has rust at the weatherstrip channel.
Top is good / Targa latches are good
Hood is clean / Trunk has weird reinforcement in it but is clean
Green Door glass / Windshield cracked / rear window is clean w/o defroster
Tail shift HA trans / W Code 1.7 turns by hand
Steel wheels
No Sway Bars

I'll be posting pics and contacting everyone who posted shortly.

Could use left and right door handle if available. Mainly left hand side. Thanks Paul.

@SO.O.C914er I have one guy ahead of you, if he passes I'll let you know

In addition to the 4 pieces of metal I need I could also use a pair of junky seats and frames. I will be doing a sliding full passenger seat.

@djway I'll have one seat with frame if no one takes the 73' whole

70' is completely disassembled, let me know what you need.

73' is coming apart on Saturday

do . you have a windshield ?
thanks, will

@willz sorry I have all the glass except windshields

ok, no hurry.. but when you find one..
save it for me
my project car has a long way to go
thanks

Will do

73 is coming apart tomorrow, if you're going to the Phoenix club swap meet on Sunday let me know and I'll toss your parts in the truck when I head that way.

I may be heading west next week and could swing by your place
Will you have any of the stuff I need?

Interested in the IMSA bumper please. On the east coast at 02351

Interested in pedal assy. PM me with price if you want to sell.

I'm primarily interested in the 73'

Ultimately I only need the pedal sled but am willing to buy an assembly if it's reasonable.

also interested if you still have complete engine tin set. I'm in if still avail

Complete engine tin sets $100 (includes flaps)

@Boothy shipping would be almost triple the price of the bumper.

@djway I have most of them, still working on sheet metal cuts if the 73 is better than the 70 was.

@Superhawk996 Message sent

Does the '73 have the 914 emblem on it? They were a gunmetal grey metal.

Earlier were gold and later were black plastic.

If nice with both posts good i'll take it.

@Olympic 914 yes it's still there, I'll see if I can get it off in one piece.

I am **very** interested in the retractible seat belts if they are still available.

Interested in the silver dot gauges, especially the tach if you still have it.

- Tony

Thanks

@Olympic 914 - sorry it had a chrome badge

@andreic - yes still have them with buckles and bolts

@retroracer do you need a functional unit or a core for the needle assembly?
Reason I ask is I have a water logged tach but the needle is still good.

As long as the bezel, glass, casing and needle are intact - then I'm good. Functionally I'll replace the innards anyway.

Could you post a quick pic showing condition?

- Tony

@Retroracer pm sent

Another 1.7 73' inbound this weekend and possibly a 1.8 75' next week.