*** please see the detail pix of the front piece below and help if you can ***

the original post was getting a little messy. these are what's currently available.
add shipping.
long front tin $80 SOLD
side pieces $35 ea. 2 SOLD
see detail pix.
Click to view attachment Click to view attachmentClick to view attachment

I have an interested party inquiring if this piece has been modified. comments please.

detail pix of the front piece.
Click to view attachment Click to view attachmentClick to view attachment

Yes, the tins have been modified.
The front for the oil fed tensioners, and sides maybe for dual plug?

Oil fed Tensioners on the front pieces, and cuts in the side pieces possibly for twin plug spark plug wire routing; or possibly to clear the suspension bolts on engine insertion / removal (though this is not usually necessary)

- Tony

The side pieces cut to clear the trailing arm bolt.

The front piece and two of the three side pieces are aftermarket copies.
Carrera tensioner mods are not an issue. Even on an original part.
The side pieces ? installing a 6 engine is always a juggling act.
I would never cut originals. I install them after the engine is mounted but I have
stupid patience and tenacity.
Cut fakes ? who cares ?
I'd fab a filler piece to attach after engine install.