Will be disecting this roller. Front right fender is spoken for. What is left is pretty solid and with out rust. Priced according to the size and difficulty of cutting the part. Local pickup preferred on large sections.

1) I’d like to grab the front trunk please
2) Can I also pick up the front a-arms with the rollbar tabs

I'll take the driver's side front wheel custom parking brake

I could use a Steering Rack Cover if you have one?
Going to 75228

@aharder post='2758835' date='Nov 1 2019, 06:59 PM']
I could use a Steering Rack Cover if you have one?
Going to 75228
[/quote]

Yes I pulled the cover and it is in good shape with a few dents.
Shipping is $20 in a flat rate box.
Will post a picture later.

Ok. $25.

Bruce,
Let me have the trunk lock.

Rear bumper still there for sale?

@bdstone914 - can I please section the rear driver floor near the bulkhead?

I will help cut that out along with the front trunk

Just a quick thank you to Bruce.

He spent a bunch of time with me today to help me secure what I needed from the car and I just wanted to publicly say Thank You @bdstone914

Bruce is a great guy. Super helpful always going the extra mile.

Yes but there is a lot of distortion on one end.
It is an early sharp corner bumper.

@914Sixer date='Nov 2 2019, 05:30 AM' post='2758889']
Bruce,
Let me have the trunk lock.

Rear trunk correct?
It is not great but it is yours. It may have a key that works. The ignition had a key but I have not tried it in the trunk lock.
Bruce

Yep. need it for parts.

Does it have a wiper lever that works for a 75?

Thanks

@abes914 date='Nov 4 2019, 09:57 PM' post='2759461']
Does it have a wiper lever that works for a 75?

Thanks
[/quote]

It is a 73 but i think they are interchangable.
Have the column pulled. Need to check.