Hi guys - last shop I used was Bill Brewster (prior to issues), so looking for the latest on Orange County shops that people have been happy with. Want to get professional eyes on my 3.2 for the 914/6 build.

Thanks!

Vision Motorsports, Laguna Hills.

Thanks Keith, will ring then.

You might try Aase Motors in Fullerton. They have my 3.2 and my car. I had the long block rebuilt before I knew about Aase. Regardless Aase did the rest of the motor and they have done many motors for our members. They always have Porsche race cars in their shops and know the old Porsche cars/motors well. Talk to Jeff at 714.770.8187. I know Allan from Aase will be the the Phoenix Club swap this Sunday.

Thanks @Cairo94507

I called Vision. They said they don’t work on 914’s.

AASE rebuilt my 915 trans in my 914. Great guys!!

My 3.2l is out, I'll tell them it is for a 911.

Grin.

That works!! Just dress nice when you drop it off! Lol

waiting...

IIRC, a member here, Steve Abrams, works there. Lots of 914 experience and good guy

Thanks guys, I will try to connect with them at the event on Sunday. I need to get going on the 912 and 911 interior, have a feeling it’s goong to be a very expensive day over at the Phoenix club .

Though it may be a bit of a haul, Henry Schmidt at Supertec does a great job.

Fallbrook isn’t that far, worth the drive if they are the best option.

Thanks for the referral.

He's one of the best of the best and priced accordingly.