OK I SCREWED UP!!!

All my fault - I stuffed the wires for the column up out of sight.

While test driving the wires got twisted up by the steering shaft "U" joint - think of spaghetti on a fork.

Again it was my fault.

I could really use a set - pig tails of the smaller plug for the wiper, blinker and high beam connectors. I need the connector with about 6" length of wires on them.

Thanks Daryl

Anyone have pictures of the two plugs, looking for color picture of wires and positions?

Thanks

Chuck up a WTB and see if someone has some from wreaked car that's being parted,good luck.

Thanks - I mudded through the wreckage and got it back together this afternoon.

Just needed to step away from it for a time and clear my head.

Everything is working again!

http://www.914world.com/bbs2/index.php?sho...p;#entry1392527

Click to view attachment

Thank you !

Printed this out and double checked what I did!!!!

I could not read the printing on the connector so I took pictures and blow them up.

I little photo shop and I can see the writing! Eyes are getting old.



Click to view attachment

Click to view attachment

Click to view attachment Click to view attachment
Hope this helps

Click to view attachment

Click to view attachment
Hope this helps. I have 1 more picture, but can't seem to upload it.

Thank you Joe!!!