Help - Search - Members - Calendar
Full Version: FS: PMB Coachwerks #008
914World.com > The 914 Forums > Classified Forums > FS/WANTED: 914 Cars and Rollers
Eric_Shea
Life changes and family additions leave the current owner longing for more seat time. Now it’s time for someone else to enjoy this magical, narrow bodied, stroker four that has “all the right stuff”.

This is, by far one of our favorite cars, I’d dare say one of our favorite -4’s to come out of PMB Coachwerks. She struggled for a while to find her identity but, she luckily had an owner with a crystal clear vision and what a beautiful vision it was.

All around this car there are subtle yet stellar enhancements to handle her every improvement. At PMB we strive for “factory-esq” improvements when they are to be made. Never try to out-think a Porsche engineer. Starting at the nose, the chrome bumper was cut to match the factory 914-6/GT oil cooler cutout. The GT valance was narrowed to meet the stock -4 fenders all lending to a very subtle sledgehammer approach if you know what you’re looking at. Follow that theme into the front trunk and there you find a big oil cooler hanging out in a factory shroud. When you put a cooler where it belongs, it keeps temps in check under the most demanding conditions. The lines come up the passengers side and discretely terminate into a plate that runs them under the headlight bucket into the cooler. A 180° thermostat back at the engine opens once things are warmed up and keeps oil temps well below 200°.

A 916 style spacesaver spare complements an ultra clean look in the front trunk. She’s wearing her PMB Coachwerks #008 badge with pride.

Move further back, let’s find out what we’re keeping cool. You’ll find an amazing, electronically fuel injected 2270 stroker Type 4 mounted mid-ship with Jenvey throttle bodies and classic 356 stainless steel air filters topping things of. A CFR/Tangerine Racing header, muffler and heat exchanger make sure she breaths freely. Again subtle touches reside. The stock charcoal filter still keeps fuel fumes in check as they’re routed into the top of each filter. The 356 filters give it that distinctive “Porsche” look and feel. The EFI keeps things in check monitoring exhaust gasses, manifold pressure, barometric pressure, intake air temperature, throttle position and digests it all for optimum fuel delivery. This is not your dads 914.

What’s next? The transmission, that’s what. Totally rebuilt and this one has a special treat, we had a true 16,000 mile gear stack just “lay’n around” and it was truly a thing of beauty. The gears still had fresh hash marks from machining! New clutch and, Chris from CFR/Tangerine to the rescue again with one of their stellar side sift linkage kits combined with a spherical firewall bushing. She shifts like a dream. All new.

New Bilstein shocks all around and elephant bushings make this 914 feel like it came right off the lot in 73.

Of course you’re looking at PMB Performance calipers all the way around with 320i units up front and late 914 rears out back. New Porterfield AP109 R4-S pads do the dirty work up front while AP124 R4-S pads hang out in the rear. Do you think there’s a new PMB pressure regulator in this car? You are correct.

Wrapping up brakes and suspension, the owner has two sets of wheels and tires which both look outrageously good on this package. Meticulously refinished steelies sporting, what else? a “Slate Grey” finish or, our favorite for the Porsche factory look, 2.0 Fuchs with new tires all around.

Step inside. New dash, New door panels. New carpet. New backpad. New seat upholstery. Coco mats. Appearance group center console with (mandatory) Dakota Digital CHT gauge in place. It just needs you to turn the key and get acquainted with 914 bliss.

All of the metalwork has been done on this California car less than two years ago. This is truly a rust free (as in, no rust not, no charge for the rust) 914. She was then meticulously body worked and shot with her factory “Light Ivory” coating. Light Ivory is just off the hook stunning, sexy and sophisticated when matched with the semi-gloss black bits from the factory. We love this color. wub.gif

Okay, let’s put an end to the hyperbolic chatter and get to that “must have” punch list you scrolled down here for:

Stats and Details:

2270 Stroker Engine (Raby Kit)
MicroSquirt EFI
Stainless 356 Air Filters
Rebuilt Side-Shift Transmission
New Sachs Clutch
New CFR/Tangerine Racing Shift Linkage Kit
New Stainless Fuel Line
Front Oil Cooler in GT Shroud
CFR/Tangering Racing Headers, Muffler, Heat Exchanger

Tarrett Engineering Adjustable Front Sway Bar
New Bilstein Shocks/ Struts
Turbo Tie Rods
140# Rear Springs
BMW 320i Front Caliper, 914 Rear Calipers, rebuilt by PMB Performance
Rebuilt PMB Performance Pressure Regulator
Porterfield R4-S Pads all Around
Slate Grey Steel Wheels & 2.0 Fuchs

GT Engine Lid
Metal, Bodywork Performed by PMB Coachwerks (no rust on this car).
New Paint & Chrome
LED headlights
French Style Driving Lights

New Dash
New Upholstery
New Carpet
New Door Cards
Rebuilt Speedometer
Rebuilt Tachometer
New Dakota Digital CHT Gauge
Rebuilt Pedal Cluster with Bronze Bushings
Coco Mats
Original Window Sticker
Original Owners Manual
Original Service Booklet
Original Bill of Sale

Asking $39,500. This is an amazing bargain for anyone contemplating this level of restoration or build for their 914.

Inquire Herein or Call PMB Performance @ 855-STOP-101 -that's- 855-786-7101 M-Fr 9-5:00 MST to go into every detail of this stunning 914-4.

eric9144
Easily half price for a super sleeper 4 that will likely shame some /6's out there in the canyons. beerchug.gif

Well done PMB, someone buy this! wub.gif
JmuRiz
Very cool car....let us know your passenger-side oil routing!
I love it!
MidshipMadness
That thing is super slick!

How much HP does that 2270 put out?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.