Full Version: wanted shift rod head 91442424102
paying 40 each delivered
George, I have a few. Let me know how to seal the deal.
Rob
Rob
Thank you please just send to us and we will send you a check
automobile atlanta 505 south marietta pky marietta ga 30060. Thank you
George, I have a few. Let me know how to seal the deal.
Rob
automobile atlanta 505 south marietta pky marietta ga 30060. Thank you
QUOTE(mojorisen914 @ May 19 2020, 03:52 PM) 
George, I have a few. Let me know how to seal the deal.
Rob
Damn. I googled the part number and found Rose Passion is getting $384.27 for those VAT included! 
And that might be in Euros at that. Why so much?
And that might be in Euros at that. Why so much?
QUOTE(dr914@autoatlanta.com @ May 20 2020, 03:56 PM)
Thank you please just send to us and we will send you a check
automobile atlanta 505 south marietta pky marietta ga 30060. Thank you
QUOTE(mojorisen914 @ May 19 2020, 03:52 PM)
George, I have a few. Let me know how to seal the deal.
Rob
Great i have two on the way
They are NLA everywhere, George is probably looking to re-machine them and sell them back to us. On the one hand it might be an awesome gesture, on the other hand let's wait for the re-manufactured price.
@Jonathan Livesay
date='May 20 2020, 08:30 PM' post='2817380']
They are NLA everywhere, George is probably looking to re-machine them and sell them back to us. On the one hand it might be an awesome gesture, on the other hand let's wait for the re-manufactured price.
[/quote]
I dont see any need to remachine these. It is not that complicated part that could be remade.
date='May 20 2020, 08:30 PM' post='2817380']
They are NLA everywhere, George is probably looking to re-machine them and sell them back to us. On the one hand it might be an awesome gesture, on the other hand let's wait for the re-manufactured price.
[/quote]
I dont see any need to remachine these. It is not that complicated part that could be remade.
QUOTE(Jonathan Livesay @ May 20 2020, 07:30 PM)
They are NLA everywhere, George is probably looking to re-machine them and sell them back to us. On the one hand it might be an awesome gesture, on the other hand let's wait for the re-manufactured price.
George sells them for $255
I guess I’ll stop giving them away. 
yes we are having them made. NLA from Porsche and NLA used. Please do not confuse them with the early variety, as those are plentiful and as well used on 911 912 models 65-86. We have a very good guy to do it, and when done , they will be very inexpensive as they should be
QUOTE(dr914@autoatlanta.com @ May 28 2020, 12:45 PM)
yes we are having them made. NLA from Porsche and NLA used. Please do not confuse them with the early variety, as those are plentiful and as well used on 911 912 models 65-86. We have a very good guy to do it, and when done , they will be very inexpensive as they should be
Old thread, I need one, are they available yet?
914 shifter head 91442424102, for side shifter at rod end.
QUOTE(Movin6 @ Dec 25 2020, 01:30 AM)
QUOTE(dr914@autoatlanta.com @ May 28 2020, 12:45 PM)
yes we are having them made. NLA from Porsche and NLA used. Please do not confuse them with the early variety, as those are plentiful and as well used on 911 912 models 65-86. We have a very good guy to do it, and when done , they will be very inexpensive as they should be
Old thread, I need one, are they available yet?
914 shifter head 91442424102, for side shifter at rod end.
@Movin6
Post ad in classifieds as Wanted to Buy - you'll find easier and cheaper.
When i replaced the linkage on my vanagon i noticed it uses a very similar part, though the set screw is 90deg rotated from the 914 part. I will have to look at my old one and compare dimensions.
These are also being made in billet currently as well, looks like a fairly cheap part to repro.
https://www.gowesty.com/product/manual/2476...tor-lever-elbow
https://www.vancafe.com/251711973-AFT-p/251711973-aft.htm
https://www.gowesty.com/product-details.php...gory_parent_id=
These are also being made in billet currently as well, looks like a fairly cheap part to repro.
https://www.gowesty.com/product/manual/2476...tor-lever-elbow
https://www.vancafe.com/251711973-AFT-p/251711973-aft.htm
https://www.gowesty.com/product-details.php...gory_parent_id=
QUOTE(mojorisen914 @ May 19 2020, 02:52 PM)
George, I have a few. Let me know how to seal the deal.
Rob
Do you have anymore? I’m interested in one. Thanks
Are they cast or CNC?
Those gowesty vancafe items are rather expensive projects.
On the core heads, removed from the shaft?
Those gowesty vancafe items are rather expensive projects.
On the core heads, removed from the shaft?
QUOTE(JamesM @ Dec 26 2020, 03:14 PM)
When i replaced the linkage on my vanagon i noticed it uses a very similar part, though the set screw is 90deg rotated from the 914 part. I will have to look at my old one and compare dimensions.
These are also being made in billet currently as well, looks like a fairly cheap part to repro.
https://www.gowesty.com/product/manual/2476...tor-lever-elbow
https://www.vancafe.com/251711973-AFT-p/251711973-aft.htm
https://www.gowesty.com/product-details.php...gory_parent_id=
Those are similar but look longer. I am making a few by starting with the shift part for the rail shift and welding on a 10mm extension.
@JamesM
QUOTE(rhodyguy @ Jan 20 2021, 08:59 PM)
Those gowesty vancafe items are rather expensive projects.
The Vanagon world is a surprisingly pricy one.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.