The aluminium strip can be salvaged but i need the seals that go with it
I am not sure if I need this one
https://900designs-container.zoeysite.com/l...eal-w-fuzzy-set
or if there is more needed?
picture of my knackered partClick to view attachment

You are correct and if you want to replace the outer fuzzey it's here -
https://900designs-container.zoeysite.com/o...sealing-strip-1

You can look at the complete kit and decide what you really need

https://900designs-container.zoeysite.com/o...sealing-strip-1

thanks @Mikey914
I need both for the aluminium strip, the rubber seal for the door side and the fuzzy for the window side?

That would be these -
https://900designs-container.zoeysite.com/o...sealing-strip-1

for the aluminum

You would need to choose early or late as the end caps make them different

Early (larger end cap smaller track)
https://900designs-container.zoeysite.com/e...ining-strip-1-1

Late (smaller end cap longer track)
https://900designs-container.zoeysite.com/l...ining-strip-set

So I noticed that it's not completely clear here but the early are symmetrical so there is not a left and right it appears that we have that listing set up so you can individually
The late we sell in sets as we have to make in sets. You can see this in the picture of the late here

champion, thanks Mark

Hi @Mikey914
This is the photo of the section on the aluminium piece
Do you recognise it as early or late?
Click to view attachment

This is a late shown

thank you Mark