Here’s a list and photos of the parts you 914 guys might be interested in.

Everything is from ether a ’73 or ’76 Porsche 914/4.

Note that the engine case and crankshaft may not be in spec due to a spun rear main bearing.

For a complete thread on everything that was done to the '72 914/4...

Yet Another Rescue Porsche thread

crankshaft $50

engine case bored 96mm cylinders $100


Engine Parts Package $150

Camshaft w/OE gear
Windage tray
Oil fill
Oil pickup tube
Aluminum camshaft drive gear
Wrist pins
(2) Oil pumps
Taco plate
Oil cooler
Oil adapter
Rockers and nuts
Oil inspection plate
Dip stick
Push rods and tubes
(2) lifter sets
Rocker keeper wires

I'm not going to breakup the parts package so everything in that or no sale.

Also, I've got a lot of interior and suspension parts.

I'll basically sell everything 914 off my garage shelves including above listed for $500 for someone willing to pickup at my garage near Nashville. Enough to fill the bed of a pickup for sure.

I'm working 12 hr. sifts so I don't have time to answer a lot of PMs or emails. Serious buyers only please. Paypal preferred.

Thanks gents!

@Han Solo

I am interested in the crank if it is a std/std.

Turned once IIRC.

EA case is a 1.7L.

I’m interested in the suspension and interior items. Any chance for a list or photo?
Thanks

You are correct. That case came from Brothers Machine shop and the original GA case from the '72 was discarded. The Brothers build spun a rear main bearing early and I subsequently had a 2056 build from FAT Performance (Brothers provided a GA case). That was a great engine.

I'm putting those notes in the ad and letting the buyers that have already contacted me know.

Sorry for the confusion and loss of memory.