I have a 1975 2.0L that was originally bought as a 'parts car' but now that all 914s are going up in value I may keep & restore the car.

The problem is the rear trunk was cut so i'm looking for someone with a parts car that has a good rear trunk floor up to the engine compartment and up to the weatherstrip at the rear trunk lid. I can then weld in and the car is complete again.



I'm in Northern California near Folsom/Sacramento. If any of you have a destroyed parts car with this sheet metal, please let me know. It's an easy cut out with a sawzall.

Thanks!

Doug

I may have you covered. I'll take pics after work. I'm about a 7 hour drive Northwest to Crescent City.
Cheers, Russ

There is a '71 at pick and pull in Newark. It would be a pain to cut that part out in the yard though. When I was there I didn't look to see how good the trunk area was.


http://www.914world.com/bbs2/index.php?showtopic=348745

https://row52.com/Vehicle/Index/RNDmc1RhjxepaAjIZ394adA4t

Here's the pics of my chassis in Crescent City $100.00 if you want the section. pick-up only (too big to ship). I also a have bunch of various 914 parts depending on what ever else you may need putting it together. Cheers, Russ Click to view attachment Click to view attachment

That would work but it's a 6.5 hour drive to get to you. I'll have to get back to you if I can't find something closer.

Re. the Newark car..... A Milwaukee SawZall can remove it in about 20 minutes. I just need to get out there. How long has that car been in the Pick-n-Pull?

Thanks for options - Keep them coming!