Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Click to view attachment

Pair of used Sebro front brake rotors. Only on the car for a few thousand miles before it was updated to five lug.
These are lug centric style for 1970-1972.

They measure 0.420" thick. For reference, the specs on front rotors are:

Thickness New: 11mm +0.05mm -0.15mm (0.4331in +0.002in -.006in)
Min. Thickness after machining 10.0mm (0.394in)
Wear Limit 9.5mm (0.374in)

SOLD $50 for the pair. Pick up in San Jose, CA or I can ship for $20 in a Priority Mail large flat rate box.

I may be interested in these.. are they specific to either the early or later struts (wedge pin type or clamp bolt type)? I seem to recall there is a difference.


.

You cannot put late hub-centric rotors on an early pinch bolt strut. The offset of the rotors will cause the rotor to interfere with the strut. While early rotors can bolt onto late struts without interfering with the strut, the caliper offset is still different.

So these would only work on early clamp bolt struts.

Thanks for clarifying, I'm gonna have to pass then. Good deal though -

GLWTS.


.