Help - Search - Members - Calendar
Full Version: FS: Early Back pads, koni fronts, gt eng lid, Fuchs 16"
914World.com > The 914 Forums > Classified Forums > FS/WTB: 914 Parts
Mike D.
Koni Front struts, 82R1730 rebuldable, good pressure but not sure about condition SOLD
Early back pads, one with seat, tell me which one you want. $100 for the full $50 for the others THE FULL BACK WITH GREY IS SOLD
GT Engine lid, needs your back grate and letters $100
Springs, stock set $25
Springs, aftermarket, heavy, not sure rate and narrower than stock $80
Fuchs Set, Chrome, 16x6 and 7 Driver condition some flaws in Chrome, the 7s have good tires 2011, 6s are older, SOLD
Fuchs 2, 16x6 SOLD
-no curb rash on either set, let me know with or without tires, ask in PM

911 3.2 complete exhaust FOR USE IN 911 $800
911 Engine mount FOR USE IN 911 $50
911 3.2 engine tins, missing one piece FOR USE IN 911 $80

Empi mufflers, fit 1.7/1.8 to 1974, originally for bus, not sure about fitment with rear valance $20 eachSOLD
Send PM with questions and for more pics if needed

All prices plus shipping. ALL shipping cost.
Mike D.
pics
Mike D.
Wheels Sold
Mike D.
pics - 911 exhaust gone
Mike D.
914 Bus Mufflers sold
sfspeed
Need black back pad. Pm sent
Tdskip
Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?
mb911
QUOTE(Tdskip @ Nov 19 2020, 08:04 AM) *

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?



Yes according to what I see.
bob164
Mike,
I will take the Konis and early back pads, the one with the grey seat inserts. Check your PMs.
Bob
Mike D.
QUOTE(Tdskip @ Nov 19 2020, 08:04 AM) *

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?


Yes, they were left overs from 914-6 conversion. I just posted here with everything else just in case someone was interested.

Maybe I should remove them to avoid confusion...
Tdskip
QUOTE(Mike D. @ Nov 19 2020, 01:12 PM) *

QUOTE(Tdskip @ Nov 19 2020, 08:04 AM) *

Mike - just to be clear the 911 engine mount and exhaust set up are for a 3.2 as fitted to a 911 rather than to fit a 3.2 to a 914, correct?


Yes, they were left overs from 914-6 conversion. I just posted here with everything else just in case someone was interested.

Maybe I should remove them to avoid confusion...


No worries on leaving them, I would, just thought making it clear what they are good for was worthwhile.

Good luck with these bits, someone will want them.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.