These are hand made wheel hanger sets for 914's that use lug bolts.
Each sets consists of two long and two short studs and a spring loaded pin. The pin functions to install/remove them and to hold the wheel on while removing the lug bolts.
The long stud will clear a center cap on a Fuchs wheel.
The short stud has the cross hole located so that it will hold the wheel against hub hub.
They are made from T6 aluminum with a rounded head for easy wheel installation.
I have four sets of four made and have the material to make more. $50 for set of four, $25 for a set of two shipped domestically. International shipping at cost. Typically about $15 to Europe.

Several sets make and i have material for several more sets.

I'll take a set of those Bruce! Can you send that set of late targa top blocks with them? I need to put to top back on the car and I don't have spares. Thanks.

Yes i can. I will paint the blocks today.

Thank you sir!

Hi Bruce,

Can you fix me up with a set of the 4 for $50.

Thanks,

Bob B Burton

Bruce, i will take a pair if you have any left
Thanks
Chris

@Gint

I have your blocks painted.
Please send payment for the wheel hanger set and i will get them out Friday.
Thanks

@bdstone - Payment coming right up Bruce. Thank you very much sir!