914World.com > Assorted 1.8 and 2.0 Parts for Sale

Full Version: Assorted 1.8 and 2.0 Parts for Sale

914World.com > The 914 Forums > Classified Forums > FS/WTB: 914 Parts

Rcleonardjr

Dec 13 2020, 10:46 AM

Dear Friends, I am leaving the 914 community.

I wish you all the best!
I hope you all can benefit from my exit. I had a 74 sport package car with an L-Jet 1.8. I built the motor up to the Raby-spec 2056 with 96mm P&Cs, new heads and valves and pro-balanced flywheel, cam, crank and squirrel cage. The longblock is assembled, never cranked, and ready for someone to finish. Here is the link to the folder with pics. Everything must go, many parts are free + shipping.

In compliance with the rules: the Motor w or wo fuel system is a negotiable $500 (I have much more in it than that) and the side-shift tranny is $150.

Cheers all!

Rick

https://photos.google.com/share/AF1QipMQPif...XJjczFGSmNPUnJR

SOLD:
- 2.0 heat exchangers
- window crank handles
- interior door handle inserts
- A & B post pillar covers
- Center console
- Speaker covers
- Motor/Trans
- Plenum/Rear Calipers
- heat deflector assemblies (tins)
- 2.0 ECU and harnesses
- Clutch Cable and shifter bushing parts
- Battery Support Tray
- Clutch Shift rod, Coupler and Cover assembly

Sales Pending:

- Deck lights
- 1.8 fuel injection system

If i have not yet responded to you, I will catch up with you in the morning - you all have been fantastic and patient. Cheers!
Rick

sfspeed

Dec 13 2020, 11:22 AM

QUOTE(Rcleonardjr @ Dec 13 2020, 11:46 AM)

Dear Friends, I am leaving the 914 community.

Hi Rick.
Interested in long block. Sending pm

Krieger

Dec 13 2020, 11:28 AM

Hi Rick. What would you want for these items shipped to CA 95405?

Rcleonardjr

Dec 13 2020, 12:26 PM

QUOTE(Krieger @ Dec 13 2020, 12:28 PM)

Hi Rick. What would you want for these items shipped to CA 95405?

Answer in pm - thanks!
Rick

ndfrigi

Dec 13 2020, 12:50 PM

Hi Rick,

how much for the following I circled from number 1 to 4?
shipped to Stanton, CA 90680.

Click to view attachment

Click to view attachment

roundtwo

Dec 13 2020, 02:37 PM

PM sent for center console with face plate for gauges to mount.

bdstone914

Dec 13 2020, 03:57 PM

I would like a price shipped for all of the parts in the attached pics. Good job on organizing and taking good pictures of your parts.
No rush. Or a lot price it it is better for you. Would need to be shipped to California. You have a lot of very good parts there. If I were closer I would get the heat exchanges.

I have a friend in Michigan who could use the 2.0 heat exchangers.

bdstone914

Dec 13 2020, 03:58 PM

AND...

BPic

Dec 13 2020, 05:35 PM

I'd be interested in the following pictures - Shipped to Florida 33196

Thanks!
Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

913B

Dec 13 2020, 06:13 PM

I am interested in the black intake plenum and the rear brake calipers.
Let me know what you want for them.

Thanks

saigon71

Dec 13 2020, 10:16 PM

PM sent.

JeffBowlsby

Dec 13 2020, 11:02 PM

How about $100. shipped to 94583 for all red boxed items below. Paypal payment.

Let me know.

pencap914

Dec 13 2020, 11:19 PM

PM Sent for the sun visors

Montreal914

Dec 14 2020, 12:52 AM

Interested in the long block if still available.

Stuckon914

Dec 14 2020, 01:48 AM

Would like center console surround and can pick up; also in Maryland

Interested in the long block; would like more info please.

ndfrigi

Dec 14 2020, 02:56 PM

QUOTE(ndfrigi @ Dec 13 2020, 10:50 AM)

Hi Rick,

how much for the following I circled from number 1 to 4?
shipped to Stanton, CA 90680.

Click to view attachment

Click to view attachment

bump to top and any update Rick? thank you!

Rcleonardjr

Dec 14 2020, 04:26 PM

QUOTE(ndfrigi @ Dec 13 2020, 01:50 PM)

Hi Rick,

how much for the following I circled from number 1 to 4?
shipped to Stanton, CA 90680.

Click to view attachment

Click to view attachment

Items 1 & 4 are sold - sorry.

Items 2 + 3 = $20+shipping

Let me know in a pm.

Cheers!
Rick

930cabman

Dec 14 2020, 05:20 PM

Hate to see you leave, good luck with any/all new endeavor's.

ndfrigi

Dec 14 2020, 06:42 PM

QUOTE(Rcleonardjr @ Dec 14 2020, 02:26 PM)

QUOTE(ndfrigi @ Dec 13 2020, 01:50 PM)

Hi Rick,

how much for the following I circled from number 1 to 4?
shipped to Stanton, CA 90680.

Click to view attachment

Click to view attachment

Items 1 & 4 are sold - sorry.

Items 2 + 3 = $20+shipping

Let me know in a pm.

Cheers!
Rick

ooops that was quicker than me. sorry I will just pass. #1 is my priority.
thank you for the response!

Rcleonardjr

Dec 15 2020, 08:28 AM

QUOTE(ndfrigi @ Dec 14 2020, 07:42 PM)

QUOTE(Rcleonardjr @ Dec 14 2020, 02:26 PM)

QUOTE(ndfrigi @ Dec 13 2020, 01:50 PM)

Hi Rick,

how much for the following I circled from number 1 to 4?
shipped to Stanton, CA 90680.

Click to view attachment

Click to view attachment

Items 1 & 4 are sold - sorry.

Items 2 + 3 = $20+shipping

Let me know in a pm.

Cheers!
Rick

ooops that was quicker than me. sorry I will just pass. #1 is my priority.
thank you for the response!

I understand - cheers!

JeffBowlsby

Dec 15 2020, 10:05 AM

QUOTE(JeffBowlsby @ Dec 13 2020, 09:02 PM)

How about $100. shipped to 94583 for all red boxed items below. Paypal payment.

Let me know.

How about me...can I get a response please.

targa72e

Dec 15 2020, 10:47 AM

I would be interested in the shift rod. Will PM you as well.

john

Click to view attachment

targa72e

Dec 15 2020, 10:54 AM

If shift rod still available also interested in coupler.

Click to view attachment

john

Rcleonardjr

Dec 15 2020, 11:02 AM

QUOTE(JeffBowlsby @ Dec 15 2020, 11:05 AM)

QUOTE(JeffBowlsby @ Dec 13 2020, 09:02 PM)

How about $100. shipped to 94583 for all red boxed items below. Paypal payment.

Let me know.

How about me...can I get a response please.

You should have a pm from me...q

ahblain

Dec 15 2020, 02:09 PM

Rick, If you still have the 1.8 heat exchangers, what is the price on them? I live in Southwestern Michigan (Benton Harbor) and would be interested in them.
Best regards,
Andy

QUOTE(Rcleonardjr @ Dec 13 2020, 11:46 AM)

Dear Friends, I am leaving the 914 community.

I wish you all the best!
I hope you all can benefit from my exit. I had a 74 sport package car with an L-Jet 1.8. I built the motor up to the Raby-spec 2056 with 96mm P&Cs, new heads and valves and pro-balanced flywheel, cam, crank and squirrel cage. The longblock is assembled, never cranked, and ready for someone to finish. Here is the link to the folder with pics. Everything must go, many parts are free + shipping.

In compliance with the rules: the Motor w or wo fuel system is a negotiable $500 (I have much more in it than that) and the side-shift tranny is $150.

Cheers all!

Rick

https://photos.google.com/share/AF1QipMQPif...XJjczFGSmNPUnJR

SOLD:
- 2.0 heat exchangers
- window crank handles
- interior door handle inserts
- A & B post pillar covers
- Center console
- Speaker covers

Sales Pending:
- Motor/Trans
- Deck lights
- Plenum/Rear Calipers
- heat deflector assemblies (tins)
- 2.0 ECU and harnesses
- 1.8 fuel injection system
-

If i have not yet responded to you, I will catch up with you in the morning - you all have been fantastic and patient. Cheers!
Rick

bdstone914

Dec 15 2020, 10:26 PM

QUOTE(ahblain @ Dec 15 2020, 02:09 PM)

Rick, If you still have the 1.8 heat exchangers, what is the price on them? I live in Southwestern Michigan (Benton Harbor) and would be interested in them.
Best regards,
Andy

QUOTE(Rcleonardjr @ Dec 13 2020, 11:46 AM)

Dear Friends, I am leaving the 914 community.

I wish you all the best!
I hope you all can benefit from my exit. I had a 74 sport package car with an L-Jet 1.8. I built the motor up to the Raby-spec 2056 with 96mm P&Cs, new heads and valves and pro-balanced flywheel, cam, crank and squirrel cage. The longblock is assembled, never cranked, and ready for someone to finish. Here is the link to the folder with pics. Everything must go, many parts are free + shipping.

In compliance with the rules: the Motor w or wo fuel system is a negotiable $500 (I have much more in it than that) and the side-shift tranny is $150.

Cheers all!

Rick

https://photos.google.com/share/AF1QipMQPif...XJjczFGSmNPUnJR

SOLD:
- 2.0 heat exchangers
- window crank handles
- interior door handle inserts
- A & B post pillar covers
- Center console
- Speaker covers

Sales Pending:
- Motor/Trans
- Deck lights
- Plenum/Rear Calipers
- heat deflector assemblies (tins)
- 2.0 ECU and harnesses
- 1.8 fuel injection system
-

If i have not yet responded to you, I will catch up with you in the morning - you all have been fantastic and patient. Cheers!
Rick

@Rcleonardjr

Rcleonardjr

Dec 16 2020, 09:54 AM

QUOTE(bdstone914 @ Dec 15 2020, 11:26 PM)

QUOTE(ahblain @ Dec 15 2020, 02:09 PM)

Rick, If you still have the 1.8 heat exchangers, what is the price on them? I live in Southwestern Michigan (Benton Harbor) and would be interested in them.
Best regards,
Andy

QUOTE(Rcleonardjr @ Dec 13 2020, 11:46 AM)

Dear Friends, I am leaving the 914 community.

I wish you all the best!
I hope you all can benefit from my exit. I had a 74 sport package car with an L-Jet 1.8. I built the motor up to the Raby-spec 2056 with 96mm P&Cs, new heads and valves and pro-balanced flywheel, cam, crank and squirrel cage. The longblock is assembled, never cranked, and ready for someone to finish. Here is the link to the folder with pics. Everything must go, many parts are free + shipping.

In compliance with the rules: the Motor w or wo fuel system is a negotiable $500 (I have much more in it than that) and the side-shift tranny is $150.

Cheers all!

Rick

https://photos.google.com/share/AF1QipMQPif...XJjczFGSmNPUnJR

SOLD:
- 2.0 heat exchangers
- window crank handles
- interior door handle inserts
- A & B post pillar covers
- Center console
- Speaker covers

Sales Pending:
- Motor/Trans
- Deck lights
- Plenum/Rear Calipers
- heat deflector assemblies (tins)
- 2.0 ECU and harnesses
- 1.8 fuel injection system
-

If i have not yet responded to you, I will catch up with you in the morning - you all have been fantastic and patient. Cheers!
Rick

@Rcleonardjr

Pm'd

Bucci

Dec 16 2020, 09:33 PM

Let me know how much you want for these parts.

Thanks,
Marc

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

72914wrx

Dec 16 2020, 09:46 PM

Are the center console parts still available?

Rcleonardjr

Dec 27 2020, 09:17 AM

QUOTE(72914wrx @ Dec 16 2020, 10:46 PM)

Are the center console parts still available?

I'm sorry - they are sold.

Rcleonardjr

Dec 27 2020, 09:18 AM

QUOTE(Bucci @ Dec 16 2020, 10:33 PM)

Let me know how much you want for these parts.

Thanks,
Marc

Click to view attachment
Click to view attachment
Click to view attachment
Click to view attachment

PMd

pedrok

Dec 27 2020, 10:25 AM

QUOTE(Rcleonardjr @ Dec 13 2020, 08:46 AM)

Dear Friends, I am leaving the 914 community.

I wish you all the best!
I hope you all can benefit from my exit. I had a 74 sport package car with an L-Jet 1.8. I built the motor up to the Raby-spec 2056 with 96mm P&Cs, new heads and valves and pro-balanced flywheel, cam, crank and squirrel cage. The longblock is assembled, never cranked, and ready for someone to finish. Here is the link to the folder with pics. Everything must go, many parts are free + shipping.

In compliance with the rules: the Motor w or wo fuel system is a negotiable $500 (I have much more in it than that) and the side-shift tranny is $150.

Cheers all!

Rick

https://photos.google.com/share/AF1QipMQPif...XJjczFGSmNPUnJR

SOLD:
- 2.0 heat exchangers
- window crank handles
- interior door handle inserts
- A & B post pillar covers
- Center console
- Speaker covers

Sales Pending:
- Motor/Trans
- Deck lights
- Plenum/Rear Calipers
- heat deflector assemblies (tins)
- 2.0 ECU and harnesses
- 1.8 fuel injection system
-

If i have not yet responded to you, I will catch up with you in the morning - you all have been fantastic and patient. Cheers!
Rick

Hi Rick,
Interested in the hood crest Pm

thanks
Pedro

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.