Got a deal on a NOS Welt anti-swaybar but it is the larger 22-23mm version (they also were available as a 19mm)
Its intended to go on a street car so this may be a tad on the large size.
Just thought there may be someone out there with a 19 that that wanted a bit more.
As my grandma used to say "you don't ask, you don't get"

Just use that big bar and set it "soft"

Uh thanks but at OE of 15mm a 19mm bar set to full soft is a "big" bar. Hoping to minimize the associated changes of the rear spring rate & bar.
Still looking

Maybe try to trade or sell to someone with a later air cooled 911.

Is it a through body sway bar?

Yes.
Click to view attachment
I wasnt aware Welt made an undermount bar

Post a WTT on Pelican 911 used parts.

@914werke
You could turn it down in a lathe

Ya, No...

Still looking.

Can you verify the size? I believe mine is a 21mm and I could use bigger.

Probably not helpful, & not meaning to highjack either - but I have an H&H 19mm bar that I’d sell out right or trade for a stock 15mm front setup (preferable).


.

Already mentioned above, but you'd probably find someone to trade over on the Pelican 911 forum.