EJ1970914/6
Dec 27 2020, 05:49 PM
Left over parts.
914 Driver seat restored concours-
No lower seat bottom pad. $495. never installed in my car since resto.. Have receipt I paid well over this 3 years ago. Someone must need this seat.
Left and right Front Tie Rods see pics below for 914/6 $125.
Early Rear view mirror for 1970 914 914/6 $75. (SOLD )
Webber carb manifolds from 914/6 2.0 ( each) part # 901.108.321 each $100. both are now (SOLD)
Center console for early 914 9146 good shape $80. ( SOLD )
Venturi set for Webbers 914/6 $150. STILL AVAILABLE
Driver Door pocket black nice shape $100. ( SOLD )
Passenger pocket nice $40.
Side pillar and front A pillar black trim $100. -- ( SOLD)
Front fog light Glass in like very good condition for Pair. $50. SOLD
Fog light Grill 1 side original- $50. (SOLD)
Sun Visors for 914 mirror is cracked on the one with a mirror but visors are very nice shape. $75. for the pair.
Full Factory manuals 8 in total - Unused condition 914 & 914/6 $675. SOLD
Amber front lenses USED hella off my 1970 914/6 one has small crack on L & R $30. SOLD
Shifter parts 2 for 914/6 I think as they came with my car. $60. for both.
Californian Mirror L and R side Pair $100. plus shipping.
Roll of black weave for 914 dash. SOLD
Will ship USPS or Fedex on most parts. whatever I pay you pay for shipping
Prefer Paypal as gift so no fees. 25 year PCA member.
Shipping out of NY. Pick up is great too. Hudson Valley NY.
EJ1970914/6
Dec 27 2020, 05:52 PM
sixnotfour
Dec 27 2020, 06:13 PM
QUOTE
Early Rear view mirror for 1970 914 914/6 $75.
Webber carb manifolds from 914/6 2.0 $100.
Center console for early 914 9146 good shape $80.
is carpet correct for 70 ?? or lo op later ??
rgalla9146
Dec 27 2020, 06:18 PM
PM sent, console and mirror....
EJ1970914/6
Dec 27 2020, 06:23 PM
QUOTE(rgalla9146 @ Dec 27 2020, 07:18 PM)
PM sent, console and mirror....
Mirror and Console ( Sold ) Thank you
EJ1970914/6
Dec 27 2020, 06:24 PM
QUOTE(sixnotfour @ Dec 27 2020, 07:13 PM)
QUOTE
Early Rear view mirror for 1970 914 914/6 $75.
Webber carb manifolds from 914/6 2.0 $100.
Center console for early 914 9146 good shape $80.
is carpet correct for 70 ?? or lo op later ??
No sure on that. Console is now sold.
sixnotfour
Dec 27 2020, 06:43 PM
QUOTE(EJ1970914/6 @ Dec 27 2020, 05:24 PM)
QUOTE(sixnotfour @ Dec 27 2020, 07:13 PM)
QUOTE
Early Rear view mirror for 1970 914 914/6 $75.
Webber carb manifolds from 914/6 2.0 $100.
Center console for early 914 9146 good shape $80.
is carpet correct for 70 ?? or lo op later ??
No sure on that. Console is now sold.
bummer for buyer
EJ1970914/6
Dec 27 2020, 06:54 PM
QUOTE(sixnotfour @ Dec 27 2020, 07:13 PM)
QUOTE
Early Rear view mirror for 1970 914 914/6 $75.
Webber carb manifolds from 914/6 2.0 $100.
Center console for early 914 9146 good shape $80.
is carpet correct for 70 ?? or lo op later ??
PM SENT on Fog light Lenses and the Manifolds. for sixnotfour Please advise if you want these Items still ??
EJ1970914/6
Dec 27 2020, 07:01 PM
Tie Rods for 914/6
Bucci
Dec 27 2020, 07:40 PM
I’ll take the front turn signal lenses... I’ll send PayPal now.
Thanks,
Marc
“New front lenses from Auto Atlanta if I recall L & R $30.”
EJ1970914/6
Dec 27 2020, 08:04 PM
QUOTE(Bucci @ Dec 27 2020, 08:40 PM)
I’ll take the front turn signal lenses... I’ll send PayPal now.
Thanks,
Marc
“New front lenses from Auto Atlanta if I recall L & R $30.”
You got it. Please send me PM with your info.
I will give you my paypal.
EJ1970914/6
Dec 27 2020, 08:14 PM
QUOTE(EJ1970914/6 @ Dec 27 2020, 09:04 PM)
QUOTE(Bucci @ Dec 27 2020, 08:40 PM)
I’ll take the front turn signal lenses... I’ll send PayPal now.
Thanks,
Marc
“New front lenses from Auto Atlanta if I recall L & R $30.”
You got it. Please send me PM with your info.
I will give you my paypal.
Sale pending on turn lenses and also the one Fog light Grill.
HIPPIEKILLER
Dec 27 2020, 08:42 PM
Hello,
I’ll take the Webber carb manifolds if they fit a 2.7 engine. Does someone know?
Thanks!
Andrés
EJ1970914/6
Dec 27 2020, 09:15 PM
QUOTE(HIPPIEKILLER @ Dec 27 2020, 09:42 PM)
Hello,
I’ll take the Webber carb manifolds if they fit a 2.7 engine. Does someone know?
Thanks!
Andrés
Anyone know if the Manifolds would fit a 2.7 Motor. ?
EJ1970914/6
Dec 28 2020, 08:20 AM
QUOTE(EJ1970914/6 @ Dec 27 2020, 10:15 PM)
QUOTE(HIPPIEKILLER @ Dec 27 2020, 09:42 PM)
Hello,
I’ll take the Webber carb manifolds if they fit a 2.7 engine. Does someone know?
Thanks!
Andrés
Anyone know if the Manifolds would fit a 2.7 Motor. ?
HIPPIEKILLER so I spoke to a buddy whom is very knowledgeable on Aircooled motors. He said this.
My 901 Manifolds would work on a 2.7 BUT are not ideal for that large a motor. These are ideal for the Smaller displacement motors.
Superhawk996
Dec 28 2020, 08:45 AM
Interested in mainfolds if anything goes sideways with prior posters 2.4L here
EJ1970914/6
Dec 28 2020, 09:28 AM
QUOTE(Superhawk996 @ Dec 28 2020, 09:45 AM)
Interested in mainfolds if anything goes sideways with prior posters 2.4L here
Noted. Thanks
EJ1970914/6
Dec 28 2020, 09:38 AM
Here are some good photos of the glass for Fogs lights. They look very good clean with just a little poss use. Says Hella on face.
I do not recall where I even got these from.
$50 for the pair plus $7. shipping.
EJ1970914/6
Dec 28 2020, 09:43 AM
Here is a new roll of Dash trim black weave roll. It measures 45" L x 5" W
Not sure what brand it is. But it looks pretty good to match original.
$45. shipped Conus.
EJ1970914/6
Dec 28 2020, 10:01 AM
Here are better photos of the Sun Visors including (crack in mirror). All angles so you can see condition. Overall decent visors. Not sure what year they are from but I would say later 914s
$75 plus shipping I would guess $15. USPS Conus
EJ1970914/6
Dec 28 2020, 10:09 AM
I also have these Old school Californian mirrors if anyone doing a Hot Rod build. Light weight and pretty cool looking design. Rubber gaskets and screws included. Mirrors are in very good to excellent condition. I see new ones like it for $89. each.
I would sell these both for $100. plus shipping.
These came off my buddies 1974 RS 3.0 when he restored it.
EJ1970914/6
Dec 28 2020, 02:23 PM
Both 901 Manifolds are now sold.
EJ1970914/6
Dec 28 2020, 04:53 PM
QUOTE(EJ1970914/6 @ Dec 28 2020, 10:28 AM)
QUOTE(Superhawk996 @ Dec 28 2020, 09:45 AM)
Interested in mainfolds if anything goes sideways with prior posters 2.4L here
Noted. Thanks
They are now sold.
rgalla9146
Dec 29 2020, 07:37 AM
PM sent on dash material
EJ1970914/6
Dec 29 2020, 07:09 PM
QUOTE(rgalla9146 @ Dec 29 2020, 08:37 AM)
PM sent on dash material
Sold
Thanks
EJ1970914/6
Dec 29 2020, 07:16 PM
QUOTE(EJ1970914/6 @ Dec 28 2020, 10:43 AM)
Here is a new roll of Dash trim black weave roll. It measures 45" L x 5" W
Not sure what brand it is. But it looks pretty good to match original.
This Dash roll is NOW SOLD
EJ1970914/6
Jan 6 2021, 11:26 AM
QUOTE(EJ1970914/6 @ Dec 28 2020, 11:09 AM)
I also have these Old school Californian mirrors if anyone doing a Hot Rod build. Light weight and pretty cool looking design. Rubber gaskets and screws included. Mirrors are in very good to excellent condition. I see new ones like it for $89. each.
I would sell these both for $100. plus shipping.
These came off my buddies 1974 RS 3.0 when he restored it.
Still avail.. any takers ?
EJ1970914/6
Mar 3 2021, 09:22 AM
Driver seat is still available Paid $700 selling for 495.
I will box and ship for buyer or pick up is great
I get a very good Fedex ground discount and weight is not much so prob $75. to anyplace in USA.
You will NOT find a nicer seat. Yes its missing the bottom cushion.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.