carl k
Mar 24 2021, 07:41 PM
SOLD! (There were some small burrs that prevented the plunger from moving over the pin- I've removed them now.) Original rear trunk upper latch, zinc plated with new plastic plunger sleeve.
Click to view attachmentClick to view attachmentClick to view attachmentClick to view attachmentSOLD
now $50 $55 shipped in the USA.
thanks!
Carl
bdstone914
Apr 18 2021, 09:18 AM
Something is not right with that assembly. The striker should extend more through the white plastic plunger and the spring is to compressed. Looks like it is hanging up on something. Aftermarket plastic part with wrong hole size?
@carl k
carl k
Apr 18 2021, 07:33 PM
Plastic bushing from 914Rubber. I'll check it out.
-Carl
mepstein
Apr 18 2021, 07:42 PM
I got 3 from 914 rubber and they were all fine but I agree, it's not positioned correctly but might just be getting hung up on a burr or something.
carl k
Apr 19 2021, 09:40 PM
mepstein nailed it. A few tiny burrs kept the bushing from sliding over the pin. It's all fixed and I've updated the ad.