I just can’t find this in a picture to figure out it’s location. Don’t suppose anyone has a pic of it mounted laying around? Thanks in advance Click to view attachment

looks like a Coil bracket and part not a 914 part.

Was actually looking for where the post mountsClick to view attachment

I have never seen that part on a 914.

Okay thanks one less thing to figure out

There is the screw that tightens the dizzy that looks similar.

yes

that sure looks like dist fixing screw - at least for a 1.8 74.
but the bracket i don't know.
its way down there and hard to see.

color seems different.

Click to view attachment Click to view attachment

Click to view attachment

distributor bracket

Wow. I never would have thought that was a factory 914 part. Learn something new every day.

They look like parts for AC installation, the 'post' part for the compressor mount
and the loop to secure hose.
How big are they ?

can you put tape measure next to items?
Matt

I’ve previously posted in a different thread that the PO had put a carb on and took all the FI stuff off and put it in a box. Now I’m putting the FI back on and this is one of the items in that box.Click to view attachment Click to view attachment

Forgot to add that it is much much larger then the clamping bracket tightening bolt on the distributor.

Its probably not a factory part.
Does it have 1/8''npt threads on both ends and is hollow trough center?
Might be stanchion for oil pressure sender?
I have never seen one, but I still have a lot to learn and see...
Matt

Not hollow and is threaded on both ends, I don’t know why I was thinking this but thought it bolted to the top of the block and had a harness holder on top. But already came across a part in the box that was a non 914 part like this one Click to view attachment