Help - Search - Members - Calendar
Full Version: SOLD 914-6 parts- suspension, oil tank/cooler/engine mount, Scheel seat, etc. SOLD
914World.com > The 914 Forums > Classified Forums > FS/WTB: 914 Parts
RonnieB
A LONG time ago I parted out a severely damaged 1970 914-6 that was used for competition and kept many of the unique parts with intention of rebuilding on a good body. I bought a 930 instead....

Parts have been in storage 30 years and I am cleaning them up for pictures which will be available Sunday night 7/11/2021.

I would like to sell these to someone looking to do a conversion such as I had in mind, and really want to sell it all as a single lot. All major parts are listed below- I have other small parts not listed but will include-

1- Suspension
2 Front Bilstein struts
2 Rear 914-6 control arms with 5 bolt hubs and long studs
2 Rear ventilated rotors
2 Rear Bilstein shocks with coil springs
4 Brake calipers (can POSSIBLY be rebuilt)

2- Engine auxilliary
Oil tank with filler neck and filter console
Engine Oil Cooler with lines
Lower front bulkhead section with 6 cyl body mount
Front engine mount 2 pieces

3- Interior
Scheel 914-6 (GT style) drivers seat needs restoration- has adapter plate for seat rails
Steering column with vintage sport type steering wheel (Leather is dried out)
Ignition switch w key
Dash assembly with wiring harness
3 instruments Tach, speedo and Oil/Temp gauge
Shifter

Body- 2 doors in very good condition, top that was sanded smooth
Door handles and rear deck release keyed same

Price: $6000 OBO.

Pick up in Lacombe, La (approx 1 hr north of New Orleans, La.)

If there is no interest in the bundle I will add individual prices to the above list at a later date.

Ronnie
rc.byrd@charter.net

8/3/2021 All Parts sold- Thanks everyone for the interest!
tscrihfield
Interested in all the interior bits if you decide to separate. Already have the rest on my car.
Thanks,
Thomas
mb911
I would be interested in column or key switch or both. Pictures will help.
Luke M
If you part it out I'd be interested in all of the motor mount parts.
jmz
Msg sent
Hutton

I would be interested in the oil tank and scheel-Mann seat
Call message or email
1-940-206-8483
Jchutton150@aol.com


quote name='RonnieB' date='Jul 10 2021, 02:08 AM' post='2929635']
A LONG time ago I parted out a severely damaged 1970 914-6 that was used for competition and kept many of the unique parts with intention of rebuilding on a good body. I bought a 930 instead....

Parts have been in storage 30 years and I am cleaning them up for pictures which will be available Sunday night 7/11/2021.

I would like to sell these to someone looking to do a conversion such as I had in mind, and really want to sell it all as a single lot. All major parts are listed below- I have other small parts not listed but will include-

1- Suspension
2 Front Bilstein struts
2 Rear 914-6 control arms with 5 bolt hubs and long studs
2 Rear ventilated rotors
2 Rear Bilstein shocks with coil springs
4 Brake calipers (can POSSIBLY be rebuilt)

2- Engine auxilliary
Oil tank with filler neck and filter console
Engine Oil Cooler with lines
Lower front bulkhead section with 6 cyl body mount
Front engine mount 2 pieces

3- Interior
Scheel 914-6 (GT style) drivers seat needs restoration- has adapter plate for seat rails
Steering column with vintage sport type steering wheel (Leather is dried out)
Ignition switch w key
Dash assembly with wiring harness
3 instruments Tach, speedo and Oil/Temp gauge
Shifter

Body- 2 doors in very good condition, top that was sanded smooth
Door handles and rear deck release keyed same

Price: $6000 OBO.

Pick up in Lacombe, La (approx 1 hr north of New Orleans, La.)

If there is no interest in the bundle I will add individual prices to the above list at a later date.

Ronnie
rc.byrd@charter.net
[/quote]
peteyd
I am interested in the brake calipers and the oil tank if you end up separating the items.

Pete
roblav1
Yup, oil tank too, for my original -6. New car, just opened up the bag holding the oil tank, pinholes!
RonnieB
I have most of the parts gathered together- hope to finish and post pictures tomorrow (Thursday 7/15/2021). Sorry for the delay- as stated I would like to sell the entire collection of parts vs. individual items.
jmz
QUOTE(RonnieB @ Jul 14 2021, 11:28 PM) *

I have most of the parts gathered together- hope to finish and post pictures tomorrow (Thursday 7/15/2021). Sorry for the delay- as stated I would like to sell the entire collection of parts vs. individual items.


I sent a message with my contact. Interested in the package.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.