Good morning - anyone know off hand what the thread is on this? I need to reposition it slightly and may need some additional line.

Thanks!

10mm metric bubble flare thread. FLAPS carry them in oremade lenght

@tdskip

Just an FYI, I had to do this on my 6 conversion. I ended up moving it to the early style location with some riv nuts. Phil provided some great pics on the location. I got a relocation kit from PMB, roughly $80 for new pre bent lines, a T fitting, a cap. I just need a banjo fitting and a coupler to go from the firewall to the new location. I believe the early cars used a right angle coupler.

Thank you gentlemen, super helpful and I very much appreciate the responses.