brant
Sep 29 2021, 09:30 AM
Well.... fall is here. I am getting back to my parts shed and some much needed cleaning. Lots of different things in this post. I will add more throughout the day.
I'm shipping for cost also.
in the past I've been going to USPS, or UPS and getting the price and PM'ing it directly to the interested party.
I'm shipping from 80503
and of course if you have access to a company shipping and better price, I'm happy to cooperate. oh... and pick up is always an option too.
First, are some cover plates, an internal part for the shift rod, and some new gaskets... All for a tail shifter. These are free to anyone that might be able to use, or even just want a gasket for a leaky trans... for the cost of shipping.
brant
Sep 29 2021, 09:37 AM
Next... A dash structure.
Honestly I doubt anyone needs this.
shipping is not going to be affordable based on the length
its likely going to end up in the metal recycle bin
but if someone is looking for a dash structure, this is from a 1972 chassis and came from my race car build
I'm looking for 10$.. so I can buy garage beer (a guy gets thirsty cleaning the shed)
brant
Sep 29 2021, 09:39 AM
window slider mechanism
someone will know for sure... I "think" its from an early window mechanism that I stripped from my 1972 race car build.
but I do not know for sure if it is early or late
Free + shipping (envelope)
brant
Sep 29 2021, 09:50 AM
gas tank buckle. decent condition
$5 +actual shipping
brant
Sep 29 2021, 10:07 AM
shift rod.
can someone tell me if this is tail or side shift?
I don't want to mislead anyone...
no more parts... just the one orphan rod
$15 + shipping
brant
Sep 29 2021, 10:13 AM
fuel tank support blocks... one right, one left
$10 + shipping
brant
Sep 29 2021, 10:18 AM
right and left sail panel aluminum trim
not perfect.
decent... but photo's of the edge of one side show some dings
I'll double check, but believe the small screws and spacers are still attached
$30 + shipping
brant
Sep 29 2021, 10:26 AM
Hinges....
all from my 1972 race car project.
a pair of front, a pair of rear, and a pair of engine lid
$20 for front or rear pairs
$10 for the smaller mounts...
(hey... can someone clarify.. are these at the engine bay I think?)
most of the shouldered bolts and hardware included.
brant
Sep 29 2021, 10:27 AM
and this set $10
brant
Sep 29 2021, 10:33 AM
"Ford" type of remote starter solenoid.
somehow I ended up with extra's...
more than I need.
I bet these are dirt cheap at the auto store.
this one is US made.
was working fine when removed...
(these are a very good solution to a hot start problem)
lets say $5 + shipping
brant
Sep 29 2021, 10:45 AM
door sill plates and trim (aluminum)
these are from my 1972 race car project also
they look really good... but one does have small dimples at the edge (pictured)
not bent
$30 for all 4 pieces
roundtwo
Sep 29 2021, 10:50 AM
Could totally use the tail shift parts mainly the gaskets.
Any fuel tank strap parts please.
PM sent
brant
Sep 29 2021, 10:53 AM
Regulator board.. with some relays on it
I patched a small 2 inch area on the bottom
a previous owner used long wood screws to attach the VR in the past
(causing the potting to crack out in the area the screws penetrated)
I'm considering this a core
it was on a working car, but the potting is not great on the back and needs a refresh
$25 + shipping
brant
Sep 29 2021, 10:55 AM
QUOTE(roundtwo @ Sep 29 2021, 10:50 AM)
Could totally use the tail shift parts mainly the gaskets.
Any fuel tank strap parts please.
PM sent
I'm happy to put the gaskets into an envelope (free)
do you want the metal plates, and lever also?
regarding the tank strap
all I have is the buckle.. no actual straps or bridge unfortunately
let me know if you want the buckle and I can put everything together in one small box
PM me an address if that sounds good to you.
brant
roundtwo
Sep 29 2021, 11:23 AM
PM sent. Yes to tank strap fitting, other tail shift parts. Thanks.
nditiz1
Sep 29 2021, 03:35 PM
Brant
I'll take take fuel tank supports, got foam on on side
Also is the trim pieces 30 shipped? If so I'll take those too.
Shivers
Sep 29 2021, 04:01 PM
" I "think" its from an early window mechanism that I stripped from my 1972 race car build.
but I do not know for sure if it is early or late
Free + shipping (envelope)"
@brant Please let me know how much to ship, thanks
brant
Sep 29 2021, 04:32 PM
QUOTE(nditiz1 @ Sep 29 2021, 03:35 PM)
Brant
I'll take take fuel tank supports, got foam on on side
Also is the trim pieces 30 shipped? If so I'll take those too.
Sorry
I failed to put details on ever picture
I’m doing actual shipping on all of the parts
But combined actual so I’ll get you the numbers
bdstone914
Sep 29 2021, 07:04 PM
QUOTE(brant @ Sep 29 2021, 09:07 AM)
shift rod.
can someone tell me if this is tail or side shift?
I don't want to mislead anyone...
no more parts... just the one orphan rod
$15 + shipping
@brant I will take the shift rod. Shipping will be to 92505
bdstone914
Sep 29 2021, 07:10 PM
QUOTE(brant @ Sep 29 2021, 09:26 AM)
Hinges....
all from my 1972 race car project.
a pair of front, a pair of rear, and a pair of engine lid
$20 for front or rear pairs
$10 for the smaller mounts...
(hey... can someone clarify.. are these at the engine bay I think?)
most of the shouldered bolts and hardware included.
@ValcoOscar
dug
Sep 29 2021, 07:20 PM
Email sent for hinges.
Literati914
Sep 29 2021, 09:18 PM
I’ll take the Ford style hot start solenoid. Shipping to Dallas 75233. Thx
.
flmont
Sep 30 2021, 04:58 PM
interested in the door sill plates..Thanks frank
brant
Oct 2 2021, 08:32 AM
QUOTE(flmont @ Sep 30 2021, 04:58 PM)
interested in the door sill plates..Thanks frank
Frank,
sent you a PM
if you get me a shipping address, I can get them out to you.
brant
brant
Oct 24 2021, 07:00 PM
Bump
914werke
Oct 24 2021, 07:12 PM
QUOTE(brant @ Sep 29 2021, 09:07 AM)
shift rod.
can someone tell me if this is tail or side shift?
I don't want to mislead anyone...
no more parts... just the one orphan rod
$15 + shipping
Front "side shift" rod & shifter coupler
Luke M
Oct 24 2021, 07:47 PM
If you still have the F&R hinges/hardware I'd like them.
Would you happen to have the rear trunk lid springs by any chance?
LMK.. Thanks
brant
Oct 25 2021, 10:38 AM
QUOTE(914werke @ Oct 24 2021, 07:12 PM)
QUOTE(brant @ Sep 29 2021, 09:07 AM)
shift rod.
can someone tell me if this is tail or side shift?
I don't want to mislead anyone...
no more parts... just the one orphan rod
$15 + shipping
Front "side shift" rod & shifter coupler
thank you!
I was curioius
brant
Oct 25 2021, 10:39 AM
QUOTE(Luke M @ Oct 24 2021, 07:47 PM)
If you still have the F&R hinges/hardware I'd like them.
Would you happen to have the rear trunk lid springs by any chance?
LMK.. Thanks
Luke,
all of the hinges went to dug
but I used to have some springs in the shed
and will look today to see if they are still there.
brant
brant
Oct 25 2021, 05:33 PM
Sorry Luke
I don’t have those hinges
I think they likely went to scrap metal long ago
Luke M
Oct 25 2021, 06:50 PM
QUOTE(brant @ Oct 25 2021, 04:33 PM)
Sorry Luke
I don’t have those hinges
I think they likely went to scrap metal long ago
Ok.. Thanks for looking.
EranS
Nov 22 2021, 10:58 PM
Hi, Assuming tail shift parts all sold? if not - I'll be happy to buy. thank you!
brant
Nov 23 2021, 07:51 AM
QUOTE(EranS @ Nov 22 2021, 09:58 PM)
Hi, Assuming tail shift parts all sold? if not - I'll be happy to buy. thank you!
They are gone
Sorry
Brant
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.