Full Version: Fuel injector plug boots
I need to replace the rubber boots on the injector plugs. Any tips on how to remove the plugs from the wire terminals?
Tools to do it are on Ebay.
You can probably get by with a paperclip, it's a pretty big tab you are trying to push down from the injector end.
My video which shows how to do this is allllmost ready! it's pretty simple. Take a very thin precision screwdriver and, one wire at a time, push down the tang from the front while you gently pull the wire from the back side. To reinstall, bend the tang up a bit so it catches when you put it back in the connector.
QUOTE(iankarr @ Mar 17 2022, 06:10 PM) 
My video which shows how to do this is allllmost ready! it's pretty simple. Take a very thin precision screwdriver and, one wire at a time, push down the tang from the front while you gently pull the wire from the back side. To reinstall, bend the tang up a bit so it catches when you put it back in the connector.
Excellent! I'll be on the lookout for that one!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.