I just acquired another pair of 911 Bilstein struts (3.5 in. Bolt spacing on Caliper.)
Bilstein PN 911 341 041 30.


All I come up with is a last numbers being 33 not 30.
I have used all the manuals, internet sources I have. Does anyone know for sure what year these would be from? I want to buy new rotors, wheel bearings etc for rebuild.

Being I have 2 complete sets, will be selling the other set at some point. That set was identified as a 74’ in the 5lug classic thread. Strut #11700127363

Can post pictures if needed.

Rotors depend on what calipers you are using.
I'm pretty sure there is just one size bearing and seals for the 3 1/2" struts.

Replaces: 911-341-041-30, 911-341-041-32, 911-341-079-33, 911-341-079-36, 911-341-079-40, 911-341-079-48, 911-341-945-00
Sold In Quantity: 1

dumpster diving ?? alot of shops replace the whole strut , if bushings are bad , or they are not aware you can replace insert.....I have 6 also , finally told the shop.. saves customers money..

Good to know about this. Pretty sure they are A calipers on them.

Ha! If I knew of a place throwing these things away, I would be dumpster diving! Who knows what else they might be throwing away!
Traded some parts for these, and purchased the other set.
Thank you for the information.

I'm no expert. I think they are SC, right? 20mm
Carrera calipers use 24mm rotors.

Doesnt matter ... Unless he has hubs and rotors..

Please give that shop my contact information

Haha ,, ask Gary Emory, porsche filled dumpsters with old stock,, shops not in the know do the same..

Those stories brought a tear to my eye... but hey, that's how Parts Obsolete was born so, all good in the end.

Both sets have hubs, rotors, calipers. I am just figuring that bearings, and rotors need to be replaced and calipers to be rebuilt.

This is the first set….

Rotor thickness is Key, Indicator...

The most recent set: 911 341 041 30

Ok, I will work on getting those measurements. Thank you.

bearings seals the same